meshbay.git/packages/meshbay-client, branch 0.20

chore: bump version to 0.20.0

2026-10-15T15:45:41Z

Co-Authored-By: Claude Opus 5.5

fix(packaging): setup ends a command-line client run from its install

2026-10-15T15:45:41Z

A `meshbay-cli chat --follow` left open holds node-runtime's DLLs, so the previous version's uninstaller failed ("Failed to uninstall old application files"), a silent update included, and left the node it had stopped not running. stop-node.ps1 now ends a meshbay-cli.exe run from this install (-InstallDir, setup's $INSTDIR), and no other copy. Found through CIM, not Get-Process: setup runs the 32-bit PowerShell, which reads no path for a 64-bit process, and the first version of the stop matched nothing. The test runs the script in that PowerShell. Checked live: an update over a running follower now ends it, replaces every file and restarts the node. Co-Authored-By: Claude Opus 5.5

feat(auth): the recovery key never reaches the hub

2026-10-15T12:25:00Z

Ticking "also e-mail it to me" at registration sent the recovery key R in the register body, and the hub appended it to the verification e-mail: the hub saw R in clear on its way out, and the resend door — no captcha — let anyone who knew a pending username and address have the hub mail a "recovery key" of their choosing. The box is gone. The recovery screen offers "E-mail it to myself", a mailto: link that opens the person's own mail application with the key filled in; the desktop shell hands mailto: to the system (http, https and mailto only) and the Android shell to a mail application (ACTION_SENDTO). The CLI drops --email-recovery-key and prints the key, as before. The hub mails the code alone, and refuses a register that still carries a recovery_key rather than dropping it, so an older client offering the option cannot tell someone their key was sent when it was not. A mailbox holding R remains, with the reset code that reaches the same mailbox, enough to recover the account's identities; the link says so, and it is the person's choice. Checked in Chrome and Firefox (headless, the real page against a stubbed hub) and by the CLI's end-to-end registration against a local hub. The Android change was not built here, and the desktop link was not clicked in the application. Co-Authored-By: Claude Opus 5.5

feat(hub): one account, several linked nodes

2026-10-15T07:33:28Z

An account links up to MAX_NODES_PER_ACCOUNT node keys (node_keys table) instead of the one users.pk_node_ed25519; the migration carries each account's key over and the downgrade keeps the last one linked. /v1/nodes/auth accepts any linked key, and its token names the key that won it (nk). PUT /me/node_key adds a key, idempotently, 409 past the limit; DELETE /me/node_key names the key: a browser session any of its own, a node only its own. Unlinking a key closes that node's socket and refuses its tokens at once, on REST and on the socket; the account's other nodes are untouched. /pubkeys no longer gives a node key to other accounts, and gives the caller its last linked one, which installed desktop apps read. The node reports waiting_for_node_key while its key is unlinked and signs in again as soon as the hub says so, so a key linked again is back within seconds; unlinking itself signs in first to hold a token naming its key. Profile -> Linked nodes lists each node (connected, last seen, IP, linked since, This machine in the desktop app) with Copy and Unlink, and adds a key by hand. The Node page banner, Create group and the desktop app add this machine's key instead of replacing another's. Messages that pointed at Settings -> Link Node point at Profile -> Linked nodes. Co-Authored-By: Claude Opus 5.5

feat(cli): meshbay-cli, a command-line client for members

2026-10-14T20:20:15Z

Signs in to the hub, lists the account's groups and their folders, and downloads and uploads files directly with each group's node, end-to-end encrypted. With no argument it opens a two-pane interactive mode (Textual). Session and device keys are kept encrypted under the system's key storage, or a 0600 key file where there is none; node keys are pinned at first contact; a new machine links as a device. Packaged on its own on Linux (deb and rpm, on meshbay-common's venv, with a man page generated from the parser) and frozen next to meshbay-node in the full Windows installer, not the light one, with a self-test the build runs. client/keys.py ports keyderive.js and is LGPL like it. Co-Authored-By: Claude Opus 5.5

feat(hub): replace reCAPTCHA with a self-hosted proof of work

2026-10-14T11:34:47Z

Sign-up and passphrase reset sent every visitor's address and browser details to Google, which needed a consent the sign-up form could not ask for freely. The hub now issues its own challenge (ALTCHA's scheme, signed with a key derived from the hub's private key, single-use, 30 minutes) and the page solves it with SubtleCrypto while the form is filled in. - GET /v1/users/captcha issues a challenge; 404 captcha_disabled when off. - [captcha] enabled / max_number replace site_key / secret_key, which are now ignored with a warning; MESHBAY_CAPTCHA_ENABLED replaces the old variables. - No Google origin left in the CSP of the hub, the desktop shell or the Android shell; captcha_site_key leaves /v1/hub/info. Co-Authored-By: Claude Opus 5.5

feat: let the operator pause and resume a root's indexing (MNP 6.2)

2026-10-11T22:17:32Z

A whole-root walk now checks its root before every file: removed or ejected, it stops instead of reading the drive to the end; paused, it finishes from the hash cache alone. A paused root is not watched, not swept by reconcile and survives a restart (roster), its indexed files stay served. Resume runs the reconcile sweep over the root, so entries and their enrichment are kept. Signed root_pause / root_resume over MNP, loopback routes, CLI `root pause|resume`, a pause button on the indexing dock and pause/resume in the roots table of Group settings. Co-Authored-By: Claude Opus 5.5

fix(client): say when the account's node is elsewhere, and let go of it

2026-10-10T07:57:29Z

Signing in on a desktop links this machine's node to the account, but never over a key already linked (that would cut off the user's other machine) nor a node set up for another account. On a real install both left the node reading "Running" while the hub refused it in a loop, and nothing said why. And the only way to unlink was the linked machine's own Node page, of no use once that machine is gone. - The Node page works out, from the node and the hub each time it looks, whether this node can serve the signed-in account (nodeLinkProblem), and says why not: "Link this node instead" (asked first) puts this node's key on the account; "Use this node for my account" switches a node set up for another account through node:start, which takeOver now lets past a node that answers "running". The first version went through node:start for both, and clicking it on a real install did nothing: a node signed in before the account was linked elsewhere answers "running". - The Profile page unlinks the account's node (DELETE /v1/users/me/node_key), from any machine. Co-Authored-By: Claude Opus 5.5

feat(packaging): the Store package declares what the NSIS scripts do

2026-10-10T07:57:29Z

A test-signed install of the MSIX build, in the WindowsApps folder a Store install uses, showed that every script-made piece of the NSIS model breaks there, because each names the install folder and every update deletes it: the firewall rules went stale, the PATH entries piled up pointing at deleted folders, and the Startup-folder .vbs was refused ("Permission denied") right after sign-in. The network capabilities the manifest declared covered nothing: they make rules for sandboxed apps only, and a listener in the package still got the Windows firewall prompt. The package's own startup task was on by default, started the node whatever mode the Node page said, and ran the console executable, whose window stopped the node when closed. The package now declares what Windows then creates at install, carries across updates and removes with the app, all without an administrator prompt (each measured on the real install, through an update and a reboot): - firewall rules for the node, in a custom manifest template, since only a package-level element can hold them; - the startup task, off by default, running meshbay-nodew.exe, a new build of the daemon without a console; - an execution alias for meshbay-node.exe, so the app adds no PATH entry. The node's CLI switches the startup task (platform.startup_task, ctypes over the WinRT ABI): Windows gives the package's identity to the executables in it, not to a powershell.exe the app starts, which got "Element not found". `meshbay-node autostart install | remove | status` therefore works in the Store package from the app and a terminal alike; the app caches the answer, since the Node page polls. Starting at boot stays the .exe installer's: the Store package offers no service mode, and the CLI refuses `service install` there. Process listings count both image names. The Node page's status poll cleared the message of a refused action within five seconds; the two errors are kept apart now (all Windows builds). Co-Authored-By: Claude Opus 5.5

feat: let the operator purge a group's chat (MNP 6.1)

2026-10-09T10:17:38Z

Signed chat_purge from the Chat settings deletes every stored message; epoch keys and attachments stay. The ack is broadcast so open chat panels empty. Co-Authored-By: Claude Opus 5.5