| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`add_root` appended to the config and to node.toml and stopped there.
`_retarget_indexer` — the MNP path — then re-points the indexer at
`groups_ctx[gid]["roots"]`, an object nobody had touched, so it was retargeted
at exactly what it already had. The directory was in the config file and
invisible everywhere else until a restart.
Worse than invisible: the ack does carry the new set, so the client showed the
directory for one paint and the next index_sync took it away again — which
reads as a UI bug and is not one. Adding it a second time was then refused as
colliding with itself, which is the only reason anyone found out.
`remove_root` and `update_root` already updated the live set; this one was
missed. The loopback API hid it, because `ui/app.py` fires `reload_fn()` after
the op and that re-reads node.toml from disk. The MNP path does not, and the
shared-directories table only started offering Add over MNP in this refactor —
a latent bug made reachable.
The ack now describes the set the node will actually serve rather than one
built on the side, so the two cannot disagree.
test_root_ops_reach_the_live_set.py holds all three ops to it, including the
counter-property that the same directory is still refused twice and that
node.toml and the live set stay in step — the two halves drifting is how an
operator's next restart silently undoes their last change. Four of its seven
fail against the code above.
Recovery on a node already in this state is `meshbay-node reload`: node.toml
has everything, nothing was lost.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011pvMdvLBG92jyhvD5pD6us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Two defects from one screenshot, and a test for the class behind the first.
**The modal was transparent.** `.ftp-panel` asked for `var(--bg-panel,
var(--bg))` and this stylesheet defines neither — the palette is `--bg-base`,
`--bg-surface`, `--bg-raised`. An unknown custom property makes the whole
declaration invalid while the rule around it still applies, so the panel simply
had no background and the page showed straight through it. Three more of mine
were the same: `--bg-hover`, `--bg-input`, `--danger`.
**The field had no layout.** It was built on `.settings-row`, which is
`display:flex; justify-content:space-between` — so a label, a hint and a value
inside one end up spread across a single line in source order, which is how it
read as three unrelated fragments per app. It is its own block now, and the
chosen folders are a table borrowing `.shared-dirs-tbl`: these are lists, and a
wrapped run of chips gives nothing to scan and nowhere to put a per-row remove.
The operator is looking at two lists of directories on one page and they should
read alike.
`test_css_variables.py` is the general form. CSS fails silently and generously
here, and nothing checked. It found four more that predate this branch: the
unread-count badge (`--danger`) had white text on nothing, a transfer link had
no colour, a notification card had no rounding and no unread marker. Fixed, and
`--warn` and `--accent-bg` are promoted from literal fallbacks to real palette
entries at exactly their current light values.
Two of its own regexes were wrong before they were right — a scoped definition
written inline, and one preceded by a comment, were both reported as undefined.
A third check comparing the two palettes fired on `--border-focus`, a focus
ring the themes share deliberately; a heuristic that has to be explained away
on its first run is worse than no test, so it is gone rather than exempted.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011pvMdvLBG92jyhvD5pD6us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
§7c said the Phase 2 fallbacks made the migration script unnecessary. That is
true of every setting but one, and the one it is not true of fails in the
unsafe direction.
`member_upload` is no longer consulted anywhere. A group whose operator had
turned uploads off keeps a node.toml root saying `upload = true`, which reads as
writable — so on the first restart after the upgrade that group accepts uploads
from every member again, silently. It cannot be a fallback: "uploads are off for
this group" and "this root is writable" are two sentences that happened to
disagree, and only the operator knows which they meant.
QE/migration/check_upload_policy.py (unversioned, per the QE/ rule) reads
roster.db and node.toml, reports which groups are affected, and prints the
`root set --no-writable` line for each. It writes nothing and exits non-zero
when something needs a decision, so a deploy script can gate on it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011pvMdvLBG92jyhvD5pD6us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The SPA is served by the hub, so deploying the hub puts this client in front of
every node — including the ones not updated yet. That window is the normal
state for as long as an operator takes, and for a node someone else runs it may
be indefinite. Three controls were broken across it, and the failure mode is
quiet: an unknown message type is logged by the node and never answered, so the
click produces a thirty-second wait ending in a timeout with nothing on screen
to say the node simply cannot do this.
Files' Upload button read `root.writable`, which a 1.0 node does not send — it
says `upload`, the same answer under the older name. The button disappeared on
every un-upgraded node. It reads both now, and still respects an explicit
`writable: false` rather than falling through to the legacy flag.
The per-app folder pickers spoke `app_directories`. Videos, Music and Photos
each had their own message before that and those still work, so the page
chooses by version: an operator on an older node keeps the ability they had.
`video_root` and `audio_root` hold one folder, so several are refused with a
reason rather than stored as the first and silently truncated.
Root management — writable, removable, eject, plug — has no older equivalent to
route to, so the table goes read-only with a line saying why and pointing at
the `meshbay-node root` commands. Chat's two settings are new with nothing
before them and are hidden the same way.
None of this was inferred from a payload's shape: `_checkNodeVersion` already
parsed the node's version and threw it away, and it is kept now. Coupling a
capability to whether some field happens to be present is how a flag flips
because an unrelated payload changed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011pvMdvLBG92jyhvD5pD6us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`ops.update_root` and `remove_root` returned `[]` when the group context had
no live RootSet, and `group-page.js` accepted it: `if (msg.roots)` is true for
an empty array. An op that succeeded would have emptied the shared-directories
table, and "the node says this group has no directories" is not something the
client can tell from "the node could not say". Both ends now refuse it — the
node builds from config rather than answering empty, and the client requires a
non-empty array.
Found while adding `test_spa_imports.py`, which is the other half of this: it
resolves every named import across the SPA against what the target actually
exports. That failure has a shape nothing else here catches — no build step to
fail, so the browser resolves the graph at load, finds a missing binding, and
the page renders blank or the component just does not appear. `node --check`
parses one file at a time and the source-reading guards look inside a file
rather than between two. The settings split moved two shared components into a
new module and rewired eight files to import them, which is exactly the change
where a rename lands in one file and not the other.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011pvMdvLBG92jyhvD5pD6us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Each app's settings were inlined in `group-settings.js` — TMDB, MusicBrainz,
and one folder picker per app, each with its own draft state and save handler
saying the same thing about a different key. They are one file per app now,
reached through the `apps.js` registry, and the page that renders them names no
application at all: adding one is a registry entry and a settings file.
The line between the two is what makes that true. What every app has — folders
— the page does generically, through one `saveDirectories` bound to the app.
What one app alone has, its pane does itself with the transport it is handed.
An app that only needs directories touches neither `group-settings.js` nor
`group-page.js`, which is `test_app_settings_plugin.py`'s subject.
`settings-ui.js` exists because a pane importing the page that renders it is a
cycle, and ES modules answer that with a temporal-dead-zone ReferenceError at
first render — a component that silently does not appear, the fault already
recorded in CLAUDE.md about hook ordering.
The flat depth-indented `<select>` of every folder in the library becomes a
modal tree. It asks the node for nothing: the tree is derived from paths the
client already holds, so it shows exactly what the group's index contains and
adds no folder-browsing protocol. For Chat's attachment folder — the one
directory that is written to rather than read — read-only roots are greyed
out, so the node's refusal arrives before the operator picks rather than when
somebody sends a file.
Videos and Music take a list of folders. A library on two drives could not be
described before; the only recourse was pointing the app at a parent containing
both, which pulls in everything else under it. The scalar shapes survive on the
wire alone, for a node speaking MNP 1.0, and the client reads them as a
one-element list.
Two things the tests caught that I would not have:
`test_asset_versioning` — six new modules were missing from `_ASSETS`. Reached
through the registry rather than imported by name, they are exactly the files
nothing else would notice changing, and a stale one is served from cache with
no version bump.
And `node --check foo.js` does **not** reliably report a module syntax error:
it accepted `${/* ... */''}` — htm template syntax pasted into a plain object
literal — and reported success. A `.mjs` copy forces the module parser and
reports it. The suite had no syntax check at all, which is how that reached a
file; `test_spa_syntax.py` does it for every module now, and pins that the
loose path is not what it uses.
Suite: 12 failures, all pre-existing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011pvMdvLBG92jyhvD5pD6us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`video_root` (a string), `audio_root` (a string) and `photo_roots` (a list)
said the same thing three ways: three roster accessors, three ops, three MNP
messages, three admin-op subjects. They become `set_app_directories(app_key,
paths)` and its single-directory wrapper, stored under `<app>_directories` and
keyed by the app's registry name — so an application can be added without
touching this layer, which is the whole claim of the plugin architecture.
The three old names still work. Their MNP messages are handled, and the roster
falls back to the old key when the new one is unset, so a node upgraded into
this keeps working with no migration step — the plan called for a script, and
a script nobody runs on the machine where it matters is worse than a fallback.
Two things are new rather than moved:
The paths are validated. The setters this replaces accepted anything, so a
typo — or a path left behind when a root was removed — was stored happily and
then matched no entry, leaving an app showing an empty tab with nothing to
distinguish "misconfigured" from "no files yet". Deliberately not
`RootSet.resolve()`: that also refuses a currently-unavailable root, and an
operator must be able to point an app at a library on a drive they ejected.
The legacy scalar is derived, never stored. `video_root` still rides on the
handshake ack for MNP 1.0 clients; kept as a second stored value it would
drift from the list within one run, which reads as "it works after a restart".
Also here: chat's own two settings (a directory, which must be on a read-write
root because it is a destination rather than a view, and a link-preview switch
gating the unfurl path — checked before the cache, or turning it off would
still serve every preview already fetched), the `app_directories`,
`chat_directory` and `chat_link_preview` MNP messages, the plural
`<app>_directories` on the handshake ack, and `music` as the app's one
identifier where storage said `audio` and the registry said `music`.
The Music enricher now resolves a boundary per configured directory rather
than one for the group: with several, a single boundary is wrong for all but
one of them, and for Music that is the difference between reading a folder as
an artist and reading it as a release.
Suite: 11 failures, all pre-existing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011pvMdvLBG92jyhvD5pD6us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It asserted `Path(win_dir).as_posix() == "C:/Users/alice/Media"`, which is only
true where `Path` is a `WindowsPath`. On every other machine a backslash is an
ordinary filename character, `as_posix()` converts nothing, and the test failed
against correct code — so it has never passed on this suite's usual host, and
never guarded anything there. `PureWindowsPath` names the flavour and makes it
the same assertion on all three platforms.
The round trip also only ever proved that `as_posix()` produces a parseable
string, never that the config writer calls it — which is the defect, and one no
Linux machine can reproduce: the file is written, parsed and served correctly
here and fails on the operator's Windows box. A second test reads ops.py for
every f-string landing on the right of a TOML `path =` and requires
`as_posix()` in it. Weak evidence, and the only kind available for a platform
the suite does not run on; checked to fail with the call removed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011pvMdvLBG92jyhvD5pD6us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Review of the Phase 1 commit found the RO/RW model sound but three paths
unfinished, each of which broke the flow the phase exists to deliver. Plus
29 test failures it introduced and no coverage for anything it added.
Uploads went to the wrong directory. The node read a `root` field on
file_upload that no client ever sent, so every upload landed in the first
writable root while the Files toolbar offered its button based on the root
being browsed — with two writable roots, uploading from one wrote into the
other. Files now names the root it is showing; Chat names one chosen in the
shell (an operator-configured directory arrives in Phase 2); the node refuses
an unknown name rather than falling back, and refuses read-only and ejected
roots by code.
Shared directories were unreachable on the web. The table read its roots
only from the loopback API, which resolves to "not available" in a browser,
so the section rendered for nobody there — while the Uploads controls it
replaced had worked — and the transport.updateRoot/ejectRoot/plugRoot methods
beside it were dead. MNP is now the path, loopback the fallback for a local
node with no live connection, and adding a root over MNP takes a typed path
since no web page can browse a remote disk.
Ejecting updated nobody's screen. transport.js resolves an admin ack against
the pending request and returns, which is right for every op whose caller
knows the value it chose; the root acks carry state only the node can compute,
so the operator who clicked Eject was the one client that never saw it happen.
And the ejected flag reached roster.db but was never read back, so a restart
undid it and the next scan read an empty mount point as an erased library.
Also: the member-upload endpoint answered 200 and did nothing (removed); the
wizard ignored the first root's RW switch; reload compared roots on name and
path, so editing writable in node.toml did nothing; the table had no path
column, which is the only thing separating two libraries sharing a basename;
apps_enabled normalisation differed between the two sides of a signed subject.
Tests: eject/plug, per-root upload refusal and the node.toml rewrite had no
coverage at all. test_member_upload_policy.py is replaced by
test_root_writable_policy.py — it tested a removed feature — and every
property worth keeping from it moved rather than being dropped.
Docs: draft-v6 structural decision 9 is annotated as superseded (the operator
can no longer have a directory only they may write to — a real capability
removed, flagged rather than hidden), the man page documents the root verb and
the RO/RW fields, and refactor-groups.md §7b records what the plan got wrong.
Suite: 41 failures before, 13 after — all 13 pre-existing on main.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011pvMdvLBG92jyhvD5pD6us
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Replace the upload boolean with per-root writable/removable/ejected flags.
Backend: new ops (update_root, eject_root, plug_root), MNP 1.1 protocol
messages, live RootSet updates so API always reflects current state, CLI
root subcommand (add/remove/set/list/eject/plug).
Frontend: SharedDirectoriesTable with optimistic toggle switches, eject/plug
in Files and Settings, upload gated on root.writable, ejected-root filtering
in all media apps, updated Create Group wizard, 10-locale i18n.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
|
| |
|
|
| |
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
| |
Put the @owner handle on the same line as the group name (flex baseline)
to save a row on mobile. Move the video buffering indicator inside the
video-container as an absolute overlay so it no longer pushes the video
down when it appears briefly during seeks.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
| |
Show a ".." row at the top of subdirectory listings to navigate back to
the parent. No path traversal risk — currentPath is internal state built
from the node's own index. Hide the mkdir button (not useful yet); update
the upload-controls test marker accordingly.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
content
The real-time watchdog path lacked the duplicate-content guard that
reconciliation already had. When a file with identical content appeared
(e.g. browser download appending " (2)"), add_entry overwrote the
original's index entry — making it vanish from the file list despite
still being on disk. Now check get_entry before adding, matching the
reconciliation logic.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
| |
Remove the Select/Done toggle — checkboxes and action buttons are
always visible. A select-all checkbox in the header row follows the
standard pattern: check selects all visible items, uncheck clears the
entire selection, indeterminate when partially selected. Navigation
and file preview are unaffected (only the checkbox selects).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
|
| |
|
|
| |
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Files above 40 MB are no longer read in full. Instead, blake3 hashes
45 MB of samples (first 20 MB + last 20 MB + 5 MB at 50% offset).
Files at or below 40 MB are unchanged (full read, hash_version 1).
A new `hash_version` field on IndexEntry (default 1) travels on the
wire and through the cache so both versions coexist without breaking
existing nodes or clients.
The IndexCache auto-migrates its schema on open (ALTER TABLE), so no
manual step is required on upgrade. A standalone migration script is
available in QE/migration/ for operators who want to preview or force
a full re-hash.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Two independent breaks in the Windows first-run path:
- node:start's win32 branch never linked the node's Ed25519 key to the hub
account, so the daemon sat at waiting_for_account and the Create Group
wizard span on "Detecting local node…" for ever — the only way through
was pasting the key by hand on the Profile page. The Linux branch has
always done this inline; factor it into linkNodeKeyAndAwaitRunning() and
call it from win32 too. PUT /v1/users/me/node_key overwrites, so this
also recovers an account still carrying a previous machine's node key.
- service.ps1's install branch did `$action = New-ScheduledTaskAction`,
shadowing its own [ValidateSet(...)][string]$Action parameter (PowerShell
variable names are case-insensitive). The CimInstance was coerced to the
string "MSFT_TaskExecAction", Register-ScheduledTask -Action rejected it,
and "background service" mode never created the task — reproduced live.
Rename the locals to $taskAction / $bootTrigger / $taskPrincipal.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
| |
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The tray's Start/Stop already drove nodeService.status/stop/restart, which
had full win32 branches for both startup modes from the Node page work --
so enabling it on Windows is widening two platform gates (the `tray`
capability in preload.js, the window:minimize-to-tray handler in main.js),
not new logic.
Replaced the tray icon: the previous white chevron-in-a-box read as an
envelope at tray size. New icon is a small "M" drawn as mesh nodes and
edges, echoing the app icon's own motif, in the brand blue instead of
plain white so it stays legible on both light and dark taskbars/panels.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
-LogonType S4U
schtasks.exe has no flag naming the logon type directly -- it only infers
S4U vs Interactive from whether /rp is present, and both readings broke
live on a blank-password account: /rp "" fails schtasks' own credential
validation, and omitting /rp registers "Interactive only", which never
launches the process at boot or on demand despite installing cleanly.
Register-ScheduledTask -LogonType S4U names the logon type explicitly, no
inference. Confirmed live: install, manual start, and unattended boot-time
start all now work.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Same 768px breakpoint the hamburger appears at, where the nav is tightest and
the button has least to offer.
Belt and braces rather than the only guard: `capabilities.tray` is false
without the Electron bridge, so no browser has ever rendered this. What this
covers is the app's own window dragged narrow.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtfG7z6wHWj8RKHCvxQtY1
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The first icon was an arrow dropping into a receptacle, which is the download
glyph -- a vertical stem above a container reads that way whatever the context.
Replaced with a window folding a chevron into itself: no stem, and the frame
says which object is being minimised. Applied to both the nav button and the
panel indicator, which carried the same wrong shape.
The menu now offers Start or Stop for the node daemon, chosen from its actual
state and shown only when there is a daemon to act on: `supported && installed`,
so a machine with no node installed gets no entry rather than a control that
fails when used. `restart` is the start verb -- systemd's restart starts a
stopped unit, and there is no separate one to call.
The three service handlers become named functions so the tray drives exactly
what the Node page drives, instead of a second copy of the systemctl and Task
Scheduler branches. A read of the state that throws is treated as no control
at all.
The menu is rebuilt on a 5s timer while an indicator exists, and again straight
after an action. libappindicator has no "menu is about to open" event, so a menu
built once would show a stale Start/Stop for the life of the process; `systemctl
--user show` costs a few milliseconds.
Locales: tray.start_node / tray.stop_node in all ten.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtfG7z6wHWj8RKHCvxQtY1
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A dedicated monochrome button in the nav, immediately left of the notification
bell, hides the window to a tray indicator. Linux only for now; Windows is
being done on that OS, and the capability is declared per platform so the
button never appears where the desktop shows no indicator -- there it would
hide the window for good.
Hides, never closes: `window-all-closed` quits the app, so closing here would
make "minimise" mean "exit" and drop the session, the transfers and the node
connection. `second-instance` now calls the same restore path, since focusing
a hidden window does nothing visible.
The context menu is not decoration. Under libappindicator -- how GNOME shows a
tray at all, via the AppIndicator extension -- `tray.on('click')` never fires;
the indicator only opens its menu. A tray whose sole affordance was a click
would be inert on the one desktop this targets. The click handler is kept for
desktops that do send it.
Menu labels come from the renderer with the IPC call: the locale files are the
interface's, the main process has no i18n, and a second string table is how two
of them start disagreeing. English fallbacks if none arrive.
The icon lives in src/, not build/: package.json `files` packages only `src/**`
and `ui/**`, so an icon under build/ is present in a dev run and missing from
every installed one. Monochrome, stroked, matching the nav glyph.
Verified on this host: Ubuntu GNOME with ubuntu-appindicators@ubuntu.com and
libayatana-appindicator3 present, so the indicator has somewhere to appear.
Not yet run end to end.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtfG7z6wHWj8RKHCvxQtY1
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Checked every instruction in packaging/README.md against the code. Four were
wrong; the rest hold.
- `meshbay-hub --generate-keys` does not exist. The hub CLI takes --config,
--log-level and a prune-groups subcommand, so the documented first step of
the hub install fails with "unrecognized arguments". It is also unnecessary:
app.py's lifespan generates the keypair on first start when the file is
absent. Step removed, behaviour documented instead.
- The systemd table named two source files that do not exist. The system unit
is built from systemd/meshbay-node.service and *installed as*
meshbay-node@.service; the user unit comes from meshbay-node-user.service.
Only the destination column was right.
- The output line pinned 0.9.0; every package is 0.10.0. Replaced with
<version> so it cannot go stale again, and MESHBAY_BUILD_DIR is mentioned.
- The firewall section documented only the client's casting profile. It now
covers the node profile added in 40abf09, with the LAN scoping that profile
requires.
Verified as accurate and left alone: the /tmp/meshbay-build/out/ path, the
install order, hub.toml.example, the desktop file, and the default.env claim
(true as of c2eade6, which implemented the copy it described).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtfG7z6wHWj8RKHCvxQtY1
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Windows-only changes, all found by actually running the previous session's
work rather than by review alone:
- CTRL_CLOSE_EVENT/LOGOFF/SHUTDOWN handler (platform.py, ctypes
SetConsoleCtrlHandler) so closing a console window, signing off, or a
system shutdown runs the daemon's real _shutdown() instead of Windows
just ending the process — closing WebRTC sessions and any in-flight
ffmpeg transcode instead of orphaning it. `taskkill /F` itself stays
uncatchable (like SIGKILL), so autostart_run() now spawns with
CREATE_NEW_PROCESS_GROUP instead of DETACHED_PROCESS and autostart_end()
tries CTRL_BREAK_EVENT against the recorded pid first, falling back to
the hard kill only if that doesn't stop it in time.
- Replaced the Node page's two independent autostart/service-mode toggles
with one "start automatically" select (off / at sign-in / as a
background service). The old pair let both be active at once — starting
the daemon twice, at boot and at sign-in — and their layout broke
wrapping inside .node-service's flex row. The new control always removes
whichever mechanism is active before installing the target; platform.py's
service_install() does the same on the CLI side. The "background
service" option disables itself (with a hint pointing at the CLI) when
running unpackaged, since service-mode.ps1/service.ps1/firewall.ps1 all
assume an installed build's layout — verified live rather than assumed
by actually running those scripts unelevated.
- findNodeBinary() no longer bakes a stray \r into resolved paths. Found by
rebooting after enabling per-user autostart: where.exe listed two
matches, and stdout.trim().split('\n')[0] only strips the whole string's
ends, leaving line one's own trailing \r attached — which landed inside
the Startup .vbs's quoted path and broke it with "Unterminated string
constant" at boot. Fixed by splitting on \r?\n and trimming every line.
- Dependency audit for the Windows installer (docs/WINDOWS-PORT.md): no
VC++ Redistributable needed, confirmed by inspecting the built
node-runtime's actual import table rather than assuming. New
docs/windows-build.md: a concise clone-to-installer build guide.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The installer's own mode question is effectively one-shot: customInstall
skips it entirely once the firewall rules already exist, for any reason --
and per-user mode sets those up on its own, with no Scheduled Task involved.
So declining once (or the rules existing from something unrelated, as
happened on a dev machine this session) was a dead end: no reinstall, repair,
or uninstall/reinstall cycle could ever bring the question back, since
uninstall defaults to leaving both alone.
Add the other door in (and out): a checkbox on the Node page, next to the
existing per-user autostart toggle, wired main.js -> preload.js -> platform.js
-> node-page.js. It runs packaging/win/service-mode.ps1 -- the exact script
installer.nsh already runs -- via one Start-Process -Verb RunAs elevation, so
the two paths can never disagree about what service mode means. The elevation
helper writes a tiny param()-based .ps1 to %TEMP% so the target script path
and its arguments bind through real PowerShell parameters instead of nested
string-quoting.
Also fixes a real pre-existing gap found while checking this: 8 of the 10
locale catalogues (all but en/fr) were missing the autostart/service-mode
keys added in an earlier commit this session (b782886) -- test_locales.py's
key-set-parity check uses a for-loop with an inline assert, so it stopped at
the first mismatch (fr) and never actually reached the other eight. Backfilled
all five keys (three pre-existing, two new) in de/es/it/ja/nl/pl/pt-BR/zh-CN.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
winget install ffmpeg was considered and rejected as the mechanism: it
needs network access and winget/App Installer present at the exact
moment setup runs, and its failure mode is silent -- video just does
not stream, with nothing pointing back at ffmpeg. Not viable for a
non-technical install.
MeshBay transcodes browser-incompatible video to H.264 (-c:v libx264,
webrtc_server.py) -- a real encode, not remux -- so this needs a genuine
GPL ffmpeg build; no LGPL-only build includes an H.264 encoder, since
libx264 itself is GPL.
packaging/win/fetch-ffmpeg.ps1 (new)
Downloads, checksum-verifies and stages ffmpeg for the build. Source:
BtbN/FFmpeg-Builds' Windows x86_64 gpl-shared preset -- shared DLLs
rather than two independent static binaries, which is what nearly
tripled this: the "full" static build many devs already have via
winget is ~220 MB *per executable*. Pinned to one dated release tag
(immutable once published) and its own sha256, not the "latest" alias
BtbN repoints on every auto-build -- verified by hand first (downloaded,
hash matched, ran a real encode+probe with libx264) before pinning.
ffplay.exe (an SDL2 player, ~17 MB) is dropped; MeshBay never invokes
it. Cached after the first build. Runs its own smoke test (encode +
probe a real clip) so a broken fetch fails at build time, not for the
first user who tries to watch something.
packaging/win/LICENSE-ffmpeg.txt (new)
GPLv3 notice + where the corresponding source is, required because
this redistributes a GPL binary even though it is unmodified and only
ever invoked as a subprocess. Ships alongside ffmpeg.exe in the
installer.
build-node-runtime.ps1 / build-win.ps1
Bundling is now the DEFAULT, replacing the old opt-in -FfmpegDir (which
copied from a local directory and left most builds without ffmpeg at
all). -SkipFfmpeg opts out for a smaller, streaming-less local-iteration
build.
Also fixes a real bug the ffmpeg change exposed rather than caused: the
final `--help` smoke test did `$help -notmatch "meshbay-node"` against
$help captured as a PowerShell ARRAY (one element per line) -- -notmatch
on a collection is a FILTER, not a boolean test, and returns the
non-matching elements; any non-empty array is truthy in if() regardless
of content. Once --help wrapped past one line (it now does, with
autostart/service in the verb list) this threw unconditionally. Fixed
by joining to one string before matching, and pinned by a new test so
a future edit cannot silently reintroduce the collection-vs-scalar trap.
Verified: downloaded and hashed the pinned release by hand (matches),
ran a real libx264 encode + ffprobe against the extracted build,
fetch-ffmpeg.ps1 end to end (161 MB staged), a full build-node-runtime.ps1
run (308 MB node-runtime/) and a full installer build (MeshBay-Setup-
1.0.0.exe, 210.8 MB with ffmpeg bundled). Node suite 850 pass / 25 skip.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Two properties discussed but not yet pinned by a test, both load-bearing
for service mode:
1. A bare `meshbay-node` with no config yet -- exactly what the W3
Startup .vbs and the service-mode Scheduled Task both run unattended,
on the very first boot after a fresh install, quite possibly before
the user has ever opened the client -- must fail closed, fast, and
without a trace. Measured by hand first (under a second, zero bytes
written against a real empty %LOCALAPPDATA%); this pins it as a test
so it can't regress silently. load_config() already returns an empty
Config on a missing path rather than raising, so main() reaches its
own "hub.username not set" exit before ever touching NodeDaemon() or
asyncio.run() -- nothing here has to mock the daemon startup.
2. node:start (main.js) must call provisionNode() before it ever checks
for the service task or spawns -- reversed, the wizard's first Start
on a fresh service-mode install would run/query the daemon before
node.toml exists for it to read. Source-read, same technique as
test_desktop_shell.py: the only evidence available without a live
Electron run.
Node suite 845 pass / 25 skip.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The per-user Startup-folder launcher (W3) only ever runs after this user
signs in. A real Windows Service would start earlier, but under
LocalSystem/NetworkService -- accounts with no normal profile, so
%LOCALAPPDATA%\meshbay\ (config, keystore, data) would not exist for it.
Relocating storage to make that work is real surgery, deliberately not
done here.
Instead: a Scheduled Task, created once with admin rights, that runs AS
THIS USER at boot without needing them to sign in first.
`schtasks /create ... /ru <user> /rp ""` with no `/it` registers an S4U
(Service For User) logon -- no password stored anywhere, and unlike
LocalSystem it loads this account's own profile, so config_dir()/
data_dir() need zero changes. The cost: S4U carries no network credential,
which the node never needed -- everything it touches is local disk plus
outbound internet. Creating the task needs admin (a boot trigger touches
system-wide scheduler state, the same reason /sc onlogon needed it);
querying/starting/stopping an existing one does not -- Task Scheduler
grants the owning user that much itself, which is what lets the Node
page's Start/Stop/Restart drive it with no further UAC prompts.
meshbay_node/platform.py
service_install/_remove/_status/_run/_end -- mirrors autostart_* but
for the Scheduled Task; TASK_NAME moved here (was decorative before)
meshbay_node/daemon.py
new `service install|remove|start|stop|status` verb; restart-daemon and
reset now check for the service task too
packaging/win/service.ps1
the installer-side equivalent (extraResource); status/run/end never
self-elevate -- only install/remove do, exactly matching what
Task Scheduler itself requires
packaging/win/service-mode.ps1
ONE elevated helper running service.ps1 + firewall.ps1 together, so
choosing service mode costs exactly one UAC prompt, not two
build/installer.nsh
the install-time choice: "run as a background service?" (one
elevation, both jobs) vs the existing per-user + separate firewall
question. Checked first, unelevated, so re-running setup with
everything already configured asks nothing. Uninstall offers the
matching one-elevation cleanup, default No.
src/main.js
winServiceTaskStatus/Run/End, wired into node:installed,
node:service-status/-stop/-restart and node:start: when the Scheduled
Task exists, drive it; otherwise fall back to the existing per-user
spawn/kill path. This is the hard requirement -- Start/Stop/Restart
from the Node page must work in either mode.
node-page.js / locales
a hint explaining why the per-user autostart toggle is absent when
service mode is active (info.mode from the backend, no new field to
gate on -- it just isn't sent in that case)
package.json: 0.1.0 -> 1.0.0.
Verified: electron-builder compiles the new NSIS choice logic and ships
all three scripts; service.ps1's S4U install fails cleanly (Access
denied) when run unelevated, and its status/run/end never touch "runas".
Cannot verify the elevated success path myself (no admin in this
session) -- that needs a real UAC click. Node suite 843 pass / 25 skip;
test_packaging_win.py pins the one-elevation property, the S4U flags,
and that main.js actually checks the service task in all three handlers.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Root cause of both reports: node:service-status's `installed` field was
winAutostartInstalled() -- whether the Startup-folder launcher exists --
not whether the daemon can be managed at all. The Node page gates
Stop/Restart on `installed`, so with no autostart configured (the default
-- nothing installs it automatically) those buttons silently never
rendered, leaving only Start. A perfectly manageable daemon looked
unmanageable because a different, unrelated setting was off.
installed now reflects the actual daemon binary (findNodeBinary()), same
definition node:installed already used; autostart moves to its own field
carrying what installed used to mean.
That field also fixes the other half: there was no way to turn autostart
on except the CLI. NodeServicePanel now shows a toggle-switch next to
Start/Stop/Restart, wired through a new platform.node.autostart
(install/remove) that mirrors the existing service.* pattern -- the
preload/main.js bridge (W3) was already there, just never called from the
interface. English and French strings; other locales fall back to English
per the project's own stated policy (test_locales.py's own docstring).
Verified: node --check on every edited file; hub/node suites green
(863 pass, 0 fail — pre-existing test_locales.py encoding failures on
this Windows checkout are unrelated, reproduced identically on the
clean tree).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
spawnNodeDetached() and the Linux dev-mode fallback in node:start called
spawn() with no 'error' listener. A spawn failure -- bad path, a stale
PATH entry, antivirus interference -- is delivered on that event
asynchronously; with nothing listening, Node rethrows it as an uncaught
exception and takes the whole Electron main process down with it, instead
of the caller's own waitForNode() timeout turning "never came up" into a
clean message.
Hit directly: ENOENT spawning a stale dev-venv meshbay-node.exe (not the
installed one -- where.exe correctly resolves to the bundled exe now).
Whatever the trigger, a daemon that fails to start must never be able to
take the renderer down with it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Every run of customInstall showed the "Allow MeshBay through Windows
Firewall?" question and, on Yes, a fresh UAC prompt -- an upgrade or repair
install would ask again even with all four rules already in place.
customInstall now checks first: firewall.ps1 check, unelevated
(Get-NetFirewallRule needs no admin, only New/Remove do), exits 0 if every
rule already exists. Only a nonzero result reaches the MessageBox and the
elevated add. A second run of setup on an already-configured machine now
asks nothing.
Verified unelevated: check exits 1 and logs which rules are missing on a
machine with none of them (the fresh-install case); electron-builder
compiles the nsExec::Exec / Pop $0 / ${If} wiring. Node suite 837 pass /
25 skip.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
firewall.ps1 only handled WebRTC. The cast HTTP relay (src/cast-relay.js,
fixed TCP 19550-19553) and Chromecast/Smart TV mDNS discovery
(src/cast-chromecast.js, bonjour-service, UDP 5353) are a separate surface
on the client and were still hitting Windows' own "Allow access" dialog.
Now four named rules: MeshBay / MeshBay Node stay program-scoped with no
port restriction (there is no fixed WebRTC port to name -- the Windows
equivalent of the broad 1024-65535/udp range the Linux packaging needs,
since netfilter has no program scoping); MeshBay Cast / MeshBay Cast
Discovery add the program AND the fixed port, matching
packaging/firewall/*/meshbay-cast.xml exactly.
test_packaging_win.py cross-checks the port numbers against cast-relay.js's
own constants and the Linux firewalld definition, so the three descriptions
of one port range can't quietly drift apart.
Verified: rebuilt MeshBay-Setup-0.1.0.exe; the deployed firewall.ps1 carries
all four rules. Node suite 836 pass / 25 skip.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Installing used to mean clicking through two separate Windows "Allow
access" prompts later — one for MeshBay.exe, one for meshbay-node.exe —
each confusing on its own and worse before the exe carried a version
resource. Adding a firewall rule needs admin, and the installer is
deliberately per-user with no elevation, so this can only ever be opt-in.
packaging/win/firewall.ps1 (new, shipped as an extraResource at
resources\firewall.ps1): idempotent add/remove of the two inbound UDP
rules ("MeshBay", "MeshBay Node"), grouped, logged to
%TEMP%\meshbay-firewall.log. Locates both executables from its own path,
no arguments needed beyond the action.
build/installer.nsh: customInstall asks "Allow MeshBay through Windows
Firewall now?" and runs firewall.ps1 via NSIS ExecShellWait "runas" — one
UAC prompt — only when not ${Silent}; declining or dismissing UAC falls
back to Windows' own per-process prompts, unchanged. customUnInstall
offers the same in reverse, defaulted to No (a stale rule for a deleted
exe is inert, so this should not nag on the way out) and skipped for a
silent uninstall.
Verified: rebuilt MeshBay-Setup-0.1.0.exe (electron-builder compiles the
new LogicLib.nsh / ExecShellWait NSIS successfully); firewall.ps1 run
unelevated fails cleanly into its log ("Access is denied") rather than
silently doing nothing, confirming the fallback path. Node suite 835
pass / 25 skip.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
meshbay-node.spec now builds a VSVersionInfo (ProductName "MeshBay Node",
version read from the installed package so it tracks pyproject) and passes
it to EXE(version=...). The Windows Firewall prompt, Task Manager and the
file's Properties then show "MeshBay Node" instead of a bare exe name —
the prompt the operator has to answer on first run.
packaging/win/README.md gains a Networking section: the first-run firewall
prompt (allow Private AND Public — a VM adapter is Public), that a flat LAN
needs nothing else, what a routed/multi-subnet LAN additionally needs, the
libvirt-NAT caveat, and a pointer to the packaged Linux firewall profiles.
test_packaging_win.py covers the version resource.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
"DataChannel closed" from a peer and a clean node log look identical: the
answer-ready line reported only the srflx count, not the host addresses.
On a NAT'd host or a VM the sole host candidate is an address no other
machine can route to, and that is exactly the case you cannot see. The
line now reads `... host: 192.168.200.173, 1 srflx`, so "did the node
offer anything routable" is answerable from the journal.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
stun.services.mozilla.com no longer resolves — Mozilla shut the service
down — so every ICE gather waited out a DNS timeout on it. Removed from the
node defaults (config.py), the browser defaults (transport.js) and the Node
page's "reset to defaults" (node-page.js). Google (two endpoints) plus
Cloudflare still give two-provider coverage against a single outage, which
is the §2.12 resilience claim. draft-v6 §2.12 updated.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Staying inert without a contact is the documented policy (module docstring,
musicbay.md §3.1): the usage policy wants a contact in the User-Agent, so an
unidentified client is never sent. Staying *silent* about it was not a
decision — the operator sees Music tiles with no metadata or cover art and
has nothing to search the logs for.
Warns once per client rather than once per lookup, since the condition is
constant for the client's lifetime.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtfG7z6wHWj8RKHCvxQtY1
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
default.env was empty in every build, for three independent reasons:
1. build-node.sh read QE/node.env, which does not exist. Even pointed at the
real file it would have failed: its `grep MESHBAY_TMDB_DEFAULT_TOKEN=`
cannot match QE/tmdb.txt, which is a free-form note, not KEY=VALUE.
2. Nothing consumed default.env. packaging/README.md and build-node.sh both
claimed `meshbay-node init` copies it to <config>/node.env; grep found the
name in exactly two places, the README and the script that writes it. No
code implemented the copy, and `EnvironmentFile=-` hid the absence.
3. build-win.ps1 had no env handling at all, so Windows was empty for a
different reason than Linux.
Now: the build extracts the v4 read token -- tmdb.py sends `Authorization:
Bearer`, so it is the JWT, not the 32-char v3 key beside it in the same file --
matching KEY=VALUE first and then by shape, from MESHBAY_TMDB_TOKEN,
MESHBAY_TMDB_TOKEN_FILE, QE/node.env, QE/tmdb.txt. It writes default.env 0600
and *fails the build* if no token resolves; MESHBAY_ALLOW_NO_TMDB=1 opts out.
An empty default.env is invisible until a user opens Videos and finds no
metadata, which is how this shipped empty on two platforms at once.
platform.py gains packaged_default_env()/install_node_env()/load_node_env().
init copies the packaged file once, never overwriting an existing node.env,
and the daemon loads node.env itself at startup: systemd does this on Linux
via EnvironmentFile, but Windows autostart is a Startup-folder .vbs with no
equivalent. Already-set variables always win.
Also fixes an UnboundLocalError in main(): `config_dir` was assigned at the
top of the init branch, which made it function-local for all of main(), while
the reset branch calls `config_dir()` as the imported function. init returns
before that line, so `meshbay-node reset` could only ever raise. The local is
now cfg_dir.
Verified end to end on Linux: token baked (239 chars), init writes
<config>/node.env 0600 with it. The PowerShell half is written but unrun --
no pwsh on this machine.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtfG7z6wHWj8RKHCvxQtY1
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The packages carried a profile for LAN casting and none for the node's own
peer traffic, on the reasoning that the node exposes only a loopback admin
API. That is true of its administration surface and false of its transport.
WebRTC binds an ephemeral UDP port per connection, so there is no fixed port
to open, and a connection succeeds only if one side can initiate. Browsers
publish their host candidate as an mDNS `<uuid>.local` name, which aioice
cannot resolve on any platform and discards — so the node can never call a
browser back, and the browser must call the node. A node that refuses
unsolicited inbound UDP is unreachable from every browser on its own LAN,
leaving reflexive candidates, which fail whenever both peers share one public
IP and the router will not hairpin.
Hit twice in one session on two different hosts: a firewalld zone narrowed to
mdns + 19550-19553/tcp, and a ufw host with default deny-incoming. Both
presented as "the app cannot connect", neither as a firewall message.
Passive like the cast profile: packaged, not activated. The guide says to
scope it to a LAN zone or source, including the libvirt case, where traffic
from a guest to its own hypervisor is not masqueraded and so must be scoped
to the guest subnet rather than the LAN.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtfG7z6wHWj8RKHCvxQtY1
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`ice_interfaces` compared the operator's entry against ifaddr's
`adapter.name` only -- the kernel name on Linux (`wlp3s0f0`), but the adapter
GUID on Windows (`{846EE342-...}`). A setting written on Linux, or copied
into a Windows node's node.toml, matched no adapter at all.
The failure was silent and total rather than partial: aioice binds one socket
per host address, so an empty list means no sockets, no host candidates, and
an SDP offering only a reflexive address. The settings field is free text
with no picker, and on Windows the operator sees neither the GUID nor the
description -- `ipconfig` shows the connection name -- so an entry now
matches the adapter name, the device description, or one of the adapter's own
IPv4 addresses, case-insensitively. An address is the one identifier visible
on every platform.
A filter that matches nothing now falls back to the unfiltered list with a
warning. Losing the 5 s timeout saving is a regression; being silently
unconnectable is a defect.
Also fixes IPv4/IPv6 discrimination in the same loop: the two were told apart
by falling through to an `elif` that index-probed `ip.ip[0]` and `ip.ip[2]`,
which on an IPv4 str yields characters that compared unequal by luck rather
than by design. Now discriminated by isinstance.
WINDOWS-PORT.md claimed Transport had "no platform dependency"; it does.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtfG7z6wHWj8RKHCvxQtY1
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Chromium replaces host candidates with random `<uuid>.local` mDNS names.
aioice has no mDNS resolver on any platform: it logs `Remote candidate
"<uuid>.local" could not be resolved` and drops the candidate. Concealment
therefore does not degrade for us, it deletes the only LAN-routable
candidate and leaves reflexive pairs -- which fail whenever both peers are
behind the same NAT, because that pair needs the router to hairpin.
Measured with a Linux client and a node in a libvirt guest: exactly one pair
formed, host -> srflx on a shared public address, five binding requests, zero
responses, FAILED after 63 s. The same log shows a peer on the guest's own
subnet succeeding in 24 ms with a real-IP host candidate.
5022f2b scoped this to win32 from a session where the guest ran the *client*,
so the condition encoded "the machine being debugged" rather than "the peer
is a node". The peer is always a node, on every platform.
The trade is that our private address reaches the hub and the node in the
SDP -- the user's own infrastructure, not an arbitrary page.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtfG7z6wHWj8RKHCvxQtY1
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The installer had no console entry point, so running the CLI meant cd-ing
into resources\node-runtime\ every time. installer.nsh now adds that dir to
HKCU\Environment\Path on install and removes it on uninstall, via stock
WordFunc.nsh (electron-builder's NSIS bundle has no EnVar plugin). It points
at the real meshbay-node.exe dir — not a shim — so `where meshbay-node`,
findNodeBinary and the W3 autostart launcher all resolve to the same binary.
A WM_SETTINGCHANGE broadcast nudges open shells; new ones just work.
Rebuilt: electron-builder --win nsis compiles the WordFunc includes fine,
MeshBay-Setup-0.1.0.exe (155 MB). test_packaging_win.py covers the add/remove
symmetry.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`npm run dist:win` produces MeshBay-Setup-<version>.exe: the Electron client
and, beside it under resources/node-runtime/, the frozen meshbay-node daemon
(meshbay-common inside it). No hub. Per-user, no elevation — matches the W3
constraint that a logon-triggered scheduled task needs admin.
electron-builder / package.json
build.win nsis, build/icon.ico, extraResources -> node-runtime/
build.nsis oneClick:false perMachine:false allowElevation:false
allowToChangeInstallationDirectory:true
dist:win -> packaging/win/build-win.ps1 (mirrors dist -> build-client.sh)
packaging/win/
meshbay-node.spec + node-entry.py PyInstaller freeze of
meshbay_node.daemon:main. The awkward deps (aiortc, av, aioquic,
pydantic_core, uvicorn, watchdog, guessit, blake3, tzdata) are pulled
in whole with collect_all — that list is expected to grow when a frozen
run raises ModuleNotFoundError.
build-node-runtime.ps1 throwaway venv -> pip install -> PyInstaller ->
packages/meshbay-client/node-runtime/ (gitignored)
build-win.ps1 Node>=22 check, npm ci, Electron bump, sync-ui,
node runtime, electron-builder --win nsis
bump-electron.mjs the Chromium-CVE "build against latest Electron"
policy, out of the PS script (5.1 here-string terminator rules)
README.md
PyInstaller, not the python-embed zip: the frozen meshbay-node.exe is a
genuine relocatable single binary, which is what src/main.js:findNodeBinary
spawns (process.resourcesPath/node-runtime/meshbay-node.exe when packaged) and
what the W3 autostart launcher points at. The embeddable zip needs pip to make
that wrapper and the wrapper bakes in an absolute interpreter path.
build/installer.nsh: on uninstall, taskkill meshbay-node.exe and delete the W3
Startup .vbs (it would point wscript at a deleted binary every sign-in).
%LOCALAPPDATA%\meshbay\ — node.toml, keystore.enc — is never touched.
ffmpeg is not bundled by default (node finds it on PATH); build-win.ps1
-FfmpegDir copies ffmpeg.exe/ffprobe.exe in for a self-contained installer.
Verified on the Windows guest: PyInstaller freeze builds first try
(node-runtime 147 MB), frozen `meshbay-node status` talks to the live daemon's
loopback API; electron-builder --win nsis produces MeshBay-Setup-0.1.0.exe
(155 MB), oneClick/perMachine flags applied, node-runtime bundled at the path
findNodeBinary expects. test_packaging_win.py (14) pins the config invariants
and the NSIS <-> platform.py autostart seam. Node suite 798 pass / 34 skip.
Open: Authenticode signing (13.9 — unsigned => SmartScreen), Windows CI
(18.3), electron-updater. First clean-machine install + DPAPI + autostart
round-trip is a manual check.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The Linux node runs under `systemctl --user`. Windows has no per-user
equivalent that works without elevation: `schtasks /create /sc ONLOGON`
(even `/rl LIMITED /it`) fails with "Access is denied" for a non-admin
user, because a logon trigger touches machine-wide scheduler state.
So autostart is a `.vbs` in the per-user Startup folder instead:
CreateObject("WScript.Shell").Run Chr(34) & "<exe>" & Chr(34), 0, False
wscript runs it at every sign-in, hidden (0) and non-blocking. No admin,
no console window, no new dependency. Verified end to end: the launcher
brings the daemon up with no window and it answers its loopback API.
node/platform.py
autostart_install/remove/status — write / delete / detect the launcher
autostart_run/end — start now (DETACHED|NO_WINDOW) / taskkill
_node_exe — PATH, then next to sys.executable, then argv[0]
node/daemon.py
new `autostart install|remove|start|stop|status` verb
reload (win32) -> POST /api/reload on the loopback API
restart-daemon (win32) -> autostart_end + autostart_run
reset (win32) -> also removes the launcher
client/main.js, preload.js
node:autostart handler + winAutostart* helpers (kept in step with platform.py)
node:service-status (win32) probes the daemon; stop/restart/start use
taskkill + a detached, windowless spawn
Tests: 8 autostart cases in test_platform.py (mocked sys.platform, APPDATA
pointed at tmp); `autostart status` added to the CLI dispatch sweep. Full
meshbay-node suite green on Windows (784 passed / 34 skipped).
Still open: no CTRL_CLOSE_EVENT handler, so a bare taskkill / window close
does not run _shutdown() (SetConsoleCtrlHandler, follow-up). Service mode
(pywin32/NSSM) stays Phase 2.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Verified end to end: a live browser peer on Windows connecting to a Windows
node — handshake, index sync, file download and an ffmpeg-transcoded video
stream all work on the ProactorEventLoop. aiortc only hangs on it in the
same-process loopback the tests use, which the repo-root conftest already
handles for the suite.
So the daemon no longer forces the SelectorEventLoop: that fixed
aiortc-in-one-process but broke ffmpeg (no subprocess support on a Windows
SelectorEventLoop). `use_compatible_event_loop()` becomes
`configure_event_loop()` — a no-op unless MESHBAY_NODE_EVENT_LOOP=selector
is set explicitly, as an escape hatch that probably never needs pulling.
This drops the planned "move ffmpeg off the asyncio loop" work.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A client whose clock is a little fast could not connect at all: the MNP
handshake verified the hub-issued token with no leeway, so a token whose
`iat` was a few seconds ahead of the node's clock failed with "the token
is not yet valid (iat)". Seen against a freshly-resumed VM guest.
`meshbay_common.handshake.JWT_LEEWAY_SECONDS = 60` is the shared value;
applied to the handshake, the node's own hub-token decode, revocation-token
verification, and the hub's access-token decode. 60s absorbs NTP-level skew
without meaningfully widening the window on a stolen token (they already
carry a jti and an exp).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
| |
Whether aiortc actually hangs on the ProactorEventLoop for a live peer (as
opposed to the same-process loopback the tests use) is still open. This lets
a Windows node keep the default loop for that comparison — and, if Proactor
turns out fine, keep subprocess ffmpeg working without a code change.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Found by running the daemon on Windows for the first time:
- `meshbay-node init` wrote `unlock_file = "C:\Users\..."`, and
attach_group / add_root write `path = "C:\..."` — a raw Windows path in a
TOML basic string is a parse error (`\U`, `\a`, ... are escape sequences),
so the config would not load. All now write `Path(...).as_posix()`;
pathlib reads the forward-slash form fine on Windows.
- any `print()` carrying a `->` arrow or em dash (the CLI help and messages
are full of them) raised UnicodeEncodeError on a cp1252 console and took
the command down. New `platform.force_utf8_stdio()` reconfigures
stdout/stderr to UTF-8, called at the top of `main()`.
Verified on Windows: init writes parseable LF node.toml, the keystore
Argon2-decrypts, the loopback control API binds 127.0.0.1, and
`_update_node_toml` reads a CRLF file and rewrites it LF-only with its
standalone comments intact. Two regression tests added in test_ops.py.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|