| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The per-user Startup-folder launcher (W3) only ever runs after this user
signs in. A real Windows Service would start earlier, but under
LocalSystem/NetworkService -- accounts with no normal profile, so
%LOCALAPPDATA%\meshbay\ (config, keystore, data) would not exist for it.
Relocating storage to make that work is real surgery, deliberately not
done here.
Instead: a Scheduled Task, created once with admin rights, that runs AS
THIS USER at boot without needing them to sign in first.
`schtasks /create ... /ru <user> /rp ""` with no `/it` registers an S4U
(Service For User) logon -- no password stored anywhere, and unlike
LocalSystem it loads this account's own profile, so config_dir()/
data_dir() need zero changes. The cost: S4U carries no network credential,
which the node never needed -- everything it touches is local disk plus
outbound internet. Creating the task needs admin (a boot trigger touches
system-wide scheduler state, the same reason /sc onlogon needed it);
querying/starting/stopping an existing one does not -- Task Scheduler
grants the owning user that much itself, which is what lets the Node
page's Start/Stop/Restart drive it with no further UAC prompts.
meshbay_node/platform.py
service_install/_remove/_status/_run/_end -- mirrors autostart_* but
for the Scheduled Task; TASK_NAME moved here (was decorative before)
meshbay_node/daemon.py
new `service install|remove|start|stop|status` verb; restart-daemon and
reset now check for the service task too
packaging/win/service.ps1
the installer-side equivalent (extraResource); status/run/end never
self-elevate -- only install/remove do, exactly matching what
Task Scheduler itself requires
packaging/win/service-mode.ps1
ONE elevated helper running service.ps1 + firewall.ps1 together, so
choosing service mode costs exactly one UAC prompt, not two
build/installer.nsh
the install-time choice: "run as a background service?" (one
elevation, both jobs) vs the existing per-user + separate firewall
question. Checked first, unelevated, so re-running setup with
everything already configured asks nothing. Uninstall offers the
matching one-elevation cleanup, default No.
src/main.js
winServiceTaskStatus/Run/End, wired into node:installed,
node:service-status/-stop/-restart and node:start: when the Scheduled
Task exists, drive it; otherwise fall back to the existing per-user
spawn/kill path. This is the hard requirement -- Start/Stop/Restart
from the Node page must work in either mode.
node-page.js / locales
a hint explaining why the per-user autostart toggle is absent when
service mode is active (info.mode from the backend, no new field to
gate on -- it just isn't sent in that case)
package.json: 0.1.0 -> 1.0.0.
Verified: electron-builder compiles the new NSIS choice logic and ships
all three scripts; service.ps1's S4U install fails cleanly (Access
denied) when run unelevated, and its status/run/end never touch "runas".
Cannot verify the elevated success path myself (no admin in this
session) -- that needs a real UAC click. Node suite 843 pass / 25 skip;
test_packaging_win.py pins the one-elevation property, the S4U flags,
and that main.js actually checks the service task in all three handlers.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Installing used to mean clicking through two separate Windows "Allow
access" prompts later — one for MeshBay.exe, one for meshbay-node.exe —
each confusing on its own and worse before the exe carried a version
resource. Adding a firewall rule needs admin, and the installer is
deliberately per-user with no elevation, so this can only ever be opt-in.
packaging/win/firewall.ps1 (new, shipped as an extraResource at
resources\firewall.ps1): idempotent add/remove of the two inbound UDP
rules ("MeshBay", "MeshBay Node"), grouped, logged to
%TEMP%\meshbay-firewall.log. Locates both executables from its own path,
no arguments needed beyond the action.
build/installer.nsh: customInstall asks "Allow MeshBay through Windows
Firewall now?" and runs firewall.ps1 via NSIS ExecShellWait "runas" — one
UAC prompt — only when not ${Silent}; declining or dismissing UAC falls
back to Windows' own per-process prompts, unchanged. customUnInstall
offers the same in reverse, defaulted to No (a stale rule for a deleted
exe is inert, so this should not nag on the way out) and skipped for a
silent uninstall.
Verified: rebuilt MeshBay-Setup-0.1.0.exe (electron-builder compiles the
new LogicLib.nsh / ExecShellWait NSIS successfully); firewall.ps1 run
unelevated fails cleanly into its log ("Access is denied") rather than
silently doing nothing, confirming the fallback path. Node suite 835
pass / 25 skip.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The packages carried a profile for LAN casting and none for the node's own
peer traffic, on the reasoning that the node exposes only a loopback admin
API. That is true of its administration surface and false of its transport.
WebRTC binds an ephemeral UDP port per connection, so there is no fixed port
to open, and a connection succeeds only if one side can initiate. Browsers
publish their host candidate as an mDNS `<uuid>.local` name, which aioice
cannot resolve on any platform and discards — so the node can never call a
browser back, and the browser must call the node. A node that refuses
unsolicited inbound UDP is unreachable from every browser on its own LAN,
leaving reflexive candidates, which fail whenever both peers share one public
IP and the router will not hairpin.
Hit twice in one session on two different hosts: a firewalld zone narrowed to
mdns + 19550-19553/tcp, and a ufw host with default deny-incoming. Both
presented as "the app cannot connect", neither as a firewall message.
Passive like the cast profile: packaged, not activated. The guide says to
scope it to a LAN zone or source, including the libvirt case, where traffic
from a guest to its own hypervisor is not masqueraded and so must be scoped
to the guest subnet rather than the LAN.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtfG7z6wHWj8RKHCvxQtY1
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`npm run dist:win` produces MeshBay-Setup-<version>.exe: the Electron client
and, beside it under resources/node-runtime/, the frozen meshbay-node daemon
(meshbay-common inside it). No hub. Per-user, no elevation — matches the W3
constraint that a logon-triggered scheduled task needs admin.
electron-builder / package.json
build.win nsis, build/icon.ico, extraResources -> node-runtime/
build.nsis oneClick:false perMachine:false allowElevation:false
allowToChangeInstallationDirectory:true
dist:win -> packaging/win/build-win.ps1 (mirrors dist -> build-client.sh)
packaging/win/
meshbay-node.spec + node-entry.py PyInstaller freeze of
meshbay_node.daemon:main. The awkward deps (aiortc, av, aioquic,
pydantic_core, uvicorn, watchdog, guessit, blake3, tzdata) are pulled
in whole with collect_all — that list is expected to grow when a frozen
run raises ModuleNotFoundError.
build-node-runtime.ps1 throwaway venv -> pip install -> PyInstaller ->
packages/meshbay-client/node-runtime/ (gitignored)
build-win.ps1 Node>=22 check, npm ci, Electron bump, sync-ui,
node runtime, electron-builder --win nsis
bump-electron.mjs the Chromium-CVE "build against latest Electron"
policy, out of the PS script (5.1 here-string terminator rules)
README.md
PyInstaller, not the python-embed zip: the frozen meshbay-node.exe is a
genuine relocatable single binary, which is what src/main.js:findNodeBinary
spawns (process.resourcesPath/node-runtime/meshbay-node.exe when packaged) and
what the W3 autostart launcher points at. The embeddable zip needs pip to make
that wrapper and the wrapper bakes in an absolute interpreter path.
build/installer.nsh: on uninstall, taskkill meshbay-node.exe and delete the W3
Startup .vbs (it would point wscript at a deleted binary every sign-in).
%LOCALAPPDATA%\meshbay\ — node.toml, keystore.enc — is never touched.
ffmpeg is not bundled by default (node finds it on PATH); build-win.ps1
-FfmpegDir copies ffmpeg.exe/ffprobe.exe in for a self-contained installer.
Verified on the Windows guest: PyInstaller freeze builds first try
(node-runtime 147 MB), frozen `meshbay-node status` talks to the live daemon's
loopback API; electron-builder --win nsis produces MeshBay-Setup-0.1.0.exe
(155 MB), oneClick/perMachine flags applied, node-runtime bundled at the path
findNodeBinary expects. test_packaging_win.py (14) pins the config invariants
and the NSIS <-> platform.py autostart seam. Node suite 798 pass / 34 skip.
Open: Authenticode signing (13.9 — unsigned => SmartScreen), Windows CI
(18.3), electron-updater. First clean-machine install + DPAPI + autostart
round-trip is a manual check.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove the node daemon's server-rendered admin UI (GET / and /audit, the
_render_* helpers and inline templates) and the `meshbay-node ui` CLI verb.
The loopback control API stays; it is now JSON only, ruff-clean, and 453
lines (was 1074). Also drop three never-wired endpoints (/api/config,
/api/chat/history, /ws/chat, plus broadcast_chat) and the pointless
18000/tcp firewall profiles.
The desktop client's Node page (static/node-page.js) takes over what the
dashboard showed, reorganised into six tabs (Overview, Groups, Roster,
Peers, Audit, Settings):
- Overview: version, node id, QUIC port, hub, index-cache maintenance
- Roster: node-wide view with unpin
- Peers and Audit: auto-load on open, no Load button
- Audit: real usernames and group names (resolved from the roster and
node.toml), Previous/Next pagination newest-first, Export CSV of every
matching row
- Settings: node settings, STUN, ICE, denylist, then Unlink from hub
Backend: audit.get_entries gains `offset`; /api/audit and /api/peers
resolve ids to names via a new _display_names helper; CSP tightened to
default-src 'none' now that no HTML is served. draft-v6 sections 2.11 and
2.12 corrected -- the Node page uses the loopback API, not MNP.
One capability is intentionally dropped: browser-based admin on a headless
server. The CLI covers every operation there.
See docs/refactor-node-ui.md.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MQCaZnde4Bjjdu84dhSuF5
|
| |
|
|
|
|
| |
Packaging system complete and verified on Ubuntu 26.04 and Fedora 44.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
|
|
|
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
|