| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The per-user Startup-folder launcher (W3) only ever runs after this user
signs in. A real Windows Service would start earlier, but under
LocalSystem/NetworkService -- accounts with no normal profile, so
%LOCALAPPDATA%\meshbay\ (config, keystore, data) would not exist for it.
Relocating storage to make that work is real surgery, deliberately not
done here.
Instead: a Scheduled Task, created once with admin rights, that runs AS
THIS USER at boot without needing them to sign in first.
`schtasks /create ... /ru <user> /rp ""` with no `/it` registers an S4U
(Service For User) logon -- no password stored anywhere, and unlike
LocalSystem it loads this account's own profile, so config_dir()/
data_dir() need zero changes. The cost: S4U carries no network credential,
which the node never needed -- everything it touches is local disk plus
outbound internet. Creating the task needs admin (a boot trigger touches
system-wide scheduler state, the same reason /sc onlogon needed it);
querying/starting/stopping an existing one does not -- Task Scheduler
grants the owning user that much itself, which is what lets the Node
page's Start/Stop/Restart drive it with no further UAC prompts.
meshbay_node/platform.py
service_install/_remove/_status/_run/_end -- mirrors autostart_* but
for the Scheduled Task; TASK_NAME moved here (was decorative before)
meshbay_node/daemon.py
new `service install|remove|start|stop|status` verb; restart-daemon and
reset now check for the service task too
packaging/win/service.ps1
the installer-side equivalent (extraResource); status/run/end never
self-elevate -- only install/remove do, exactly matching what
Task Scheduler itself requires
packaging/win/service-mode.ps1
ONE elevated helper running service.ps1 + firewall.ps1 together, so
choosing service mode costs exactly one UAC prompt, not two
build/installer.nsh
the install-time choice: "run as a background service?" (one
elevation, both jobs) vs the existing per-user + separate firewall
question. Checked first, unelevated, so re-running setup with
everything already configured asks nothing. Uninstall offers the
matching one-elevation cleanup, default No.
src/main.js
winServiceTaskStatus/Run/End, wired into node:installed,
node:service-status/-stop/-restart and node:start: when the Scheduled
Task exists, drive it; otherwise fall back to the existing per-user
spawn/kill path. This is the hard requirement -- Start/Stop/Restart
from the Node page must work in either mode.
node-page.js / locales
a hint explaining why the per-user autostart toggle is absent when
service mode is active (info.mode from the backend, no new field to
gate on -- it just isn't sent in that case)
package.json: 0.1.0 -> 1.0.0.
Verified: electron-builder compiles the new NSIS choice logic and ships
all three scripts; service.ps1's S4U install fails cleanly (Access
denied) when run unelevated, and its status/run/end never touch "runas".
Cannot verify the elevated success path myself (no admin in this
session) -- that needs a real UAC click. Node suite 843 pass / 25 skip;
test_packaging_win.py pins the one-elevation property, the S4U flags,
and that main.js actually checks the service task in all three handlers.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Every run of customInstall showed the "Allow MeshBay through Windows
Firewall?" question and, on Yes, a fresh UAC prompt -- an upgrade or repair
install would ask again even with all four rules already in place.
customInstall now checks first: firewall.ps1 check, unelevated
(Get-NetFirewallRule needs no admin, only New/Remove do), exits 0 if every
rule already exists. Only a nonzero result reaches the MessageBox and the
elevated add. A second run of setup on an already-configured machine now
asks nothing.
Verified unelevated: check exits 1 and logs which rules are missing on a
machine with none of them (the fresh-install case); electron-builder
compiles the nsExec::Exec / Pop $0 / ${If} wiring. Node suite 837 pass /
25 skip.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
firewall.ps1 only handled WebRTC. The cast HTTP relay (src/cast-relay.js,
fixed TCP 19550-19553) and Chromecast/Smart TV mDNS discovery
(src/cast-chromecast.js, bonjour-service, UDP 5353) are a separate surface
on the client and were still hitting Windows' own "Allow access" dialog.
Now four named rules: MeshBay / MeshBay Node stay program-scoped with no
port restriction (there is no fixed WebRTC port to name -- the Windows
equivalent of the broad 1024-65535/udp range the Linux packaging needs,
since netfilter has no program scoping); MeshBay Cast / MeshBay Cast
Discovery add the program AND the fixed port, matching
packaging/firewall/*/meshbay-cast.xml exactly.
test_packaging_win.py cross-checks the port numbers against cast-relay.js's
own constants and the Linux firewalld definition, so the three descriptions
of one port range can't quietly drift apart.
Verified: rebuilt MeshBay-Setup-0.1.0.exe; the deployed firewall.ps1 carries
all four rules. Node suite 836 pass / 25 skip.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Installing used to mean clicking through two separate Windows "Allow
access" prompts later — one for MeshBay.exe, one for meshbay-node.exe —
each confusing on its own and worse before the exe carried a version
resource. Adding a firewall rule needs admin, and the installer is
deliberately per-user with no elevation, so this can only ever be opt-in.
packaging/win/firewall.ps1 (new, shipped as an extraResource at
resources\firewall.ps1): idempotent add/remove of the two inbound UDP
rules ("MeshBay", "MeshBay Node"), grouped, logged to
%TEMP%\meshbay-firewall.log. Locates both executables from its own path,
no arguments needed beyond the action.
build/installer.nsh: customInstall asks "Allow MeshBay through Windows
Firewall now?" and runs firewall.ps1 via NSIS ExecShellWait "runas" — one
UAC prompt — only when not ${Silent}; declining or dismissing UAC falls
back to Windows' own per-process prompts, unchanged. customUnInstall
offers the same in reverse, defaulted to No (a stale rule for a deleted
exe is inert, so this should not nag on the way out) and skipped for a
silent uninstall.
Verified: rebuilt MeshBay-Setup-0.1.0.exe (electron-builder compiles the
new LogicLib.nsh / ExecShellWait NSIS successfully); firewall.ps1 run
unelevated fails cleanly into its log ("Access is denied") rather than
silently doing nothing, confirming the fallback path. Node suite 835
pass / 25 skip.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
meshbay-node.spec now builds a VSVersionInfo (ProductName "MeshBay Node",
version read from the installed package so it tracks pyproject) and passes
it to EXE(version=...). The Windows Firewall prompt, Task Manager and the
file's Properties then show "MeshBay Node" instead of a bare exe name —
the prompt the operator has to answer on first run.
packaging/win/README.md gains a Networking section: the first-run firewall
prompt (allow Private AND Public — a VM adapter is Public), that a flat LAN
needs nothing else, what a routed/multi-subnet LAN additionally needs, the
libvirt-NAT caveat, and a pointer to the packaged Linux firewall profiles.
test_packaging_win.py covers the version resource.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Staying inert without a contact is the documented policy (module docstring,
musicbay.md §3.1): the usage policy wants a contact in the User-Agent, so an
unidentified client is never sent. Staying *silent* about it was not a
decision — the operator sees Music tiles with no metadata or cover art and
has nothing to search the logs for.
Warns once per client rather than once per lookup, since the condition is
constant for the client's lifetime.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtfG7z6wHWj8RKHCvxQtY1
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
default.env was empty in every build, for three independent reasons:
1. build-node.sh read QE/node.env, which does not exist. Even pointed at the
real file it would have failed: its `grep MESHBAY_TMDB_DEFAULT_TOKEN=`
cannot match QE/tmdb.txt, which is a free-form note, not KEY=VALUE.
2. Nothing consumed default.env. packaging/README.md and build-node.sh both
claimed `meshbay-node init` copies it to <config>/node.env; grep found the
name in exactly two places, the README and the script that writes it. No
code implemented the copy, and `EnvironmentFile=-` hid the absence.
3. build-win.ps1 had no env handling at all, so Windows was empty for a
different reason than Linux.
Now: the build extracts the v4 read token -- tmdb.py sends `Authorization:
Bearer`, so it is the JWT, not the 32-char v3 key beside it in the same file --
matching KEY=VALUE first and then by shape, from MESHBAY_TMDB_TOKEN,
MESHBAY_TMDB_TOKEN_FILE, QE/node.env, QE/tmdb.txt. It writes default.env 0600
and *fails the build* if no token resolves; MESHBAY_ALLOW_NO_TMDB=1 opts out.
An empty default.env is invisible until a user opens Videos and finds no
metadata, which is how this shipped empty on two platforms at once.
platform.py gains packaged_default_env()/install_node_env()/load_node_env().
init copies the packaged file once, never overwriting an existing node.env,
and the daemon loads node.env itself at startup: systemd does this on Linux
via EnvironmentFile, but Windows autostart is a Startup-folder .vbs with no
equivalent. Already-set variables always win.
Also fixes an UnboundLocalError in main(): `config_dir` was assigned at the
top of the init branch, which made it function-local for all of main(), while
the reset branch calls `config_dir()` as the imported function. init returns
before that line, so `meshbay-node reset` could only ever raise. The local is
now cfg_dir.
Verified end to end on Linux: token baked (239 chars), init writes
<config>/node.env 0600 with it. The PowerShell half is written but unrun --
no pwsh on this machine.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtfG7z6wHWj8RKHCvxQtY1
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`ice_interfaces` compared the operator's entry against ifaddr's
`adapter.name` only -- the kernel name on Linux (`wlp3s0f0`), but the adapter
GUID on Windows (`{846EE342-...}`). A setting written on Linux, or copied
into a Windows node's node.toml, matched no adapter at all.
The failure was silent and total rather than partial: aioice binds one socket
per host address, so an empty list means no sockets, no host candidates, and
an SDP offering only a reflexive address. The settings field is free text
with no picker, and on Windows the operator sees neither the GUID nor the
description -- `ipconfig` shows the connection name -- so an entry now
matches the adapter name, the device description, or one of the adapter's own
IPv4 addresses, case-insensitively. An address is the one identifier visible
on every platform.
A filter that matches nothing now falls back to the unfiltered list with a
warning. Losing the 5 s timeout saving is a regression; being silently
unconnectable is a defect.
Also fixes IPv4/IPv6 discrimination in the same loop: the two were told apart
by falling through to an `elif` that index-probed `ip.ip[0]` and `ip.ip[2]`,
which on an IPv4 str yields characters that compared unequal by luck rather
than by design. Now discriminated by isinstance.
WINDOWS-PORT.md claimed Transport had "no platform dependency"; it does.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtfG7z6wHWj8RKHCvxQtY1
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The installer had no console entry point, so running the CLI meant cd-ing
into resources\node-runtime\ every time. installer.nsh now adds that dir to
HKCU\Environment\Path on install and removes it on uninstall, via stock
WordFunc.nsh (electron-builder's NSIS bundle has no EnVar plugin). It points
at the real meshbay-node.exe dir — not a shim — so `where meshbay-node`,
findNodeBinary and the W3 autostart launcher all resolve to the same binary.
A WM_SETTINGCHANGE broadcast nudges open shells; new ones just work.
Rebuilt: electron-builder --win nsis compiles the WordFunc includes fine,
MeshBay-Setup-0.1.0.exe (155 MB). test_packaging_win.py covers the add/remove
symmetry.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`npm run dist:win` produces MeshBay-Setup-<version>.exe: the Electron client
and, beside it under resources/node-runtime/, the frozen meshbay-node daemon
(meshbay-common inside it). No hub. Per-user, no elevation — matches the W3
constraint that a logon-triggered scheduled task needs admin.
electron-builder / package.json
build.win nsis, build/icon.ico, extraResources -> node-runtime/
build.nsis oneClick:false perMachine:false allowElevation:false
allowToChangeInstallationDirectory:true
dist:win -> packaging/win/build-win.ps1 (mirrors dist -> build-client.sh)
packaging/win/
meshbay-node.spec + node-entry.py PyInstaller freeze of
meshbay_node.daemon:main. The awkward deps (aiortc, av, aioquic,
pydantic_core, uvicorn, watchdog, guessit, blake3, tzdata) are pulled
in whole with collect_all — that list is expected to grow when a frozen
run raises ModuleNotFoundError.
build-node-runtime.ps1 throwaway venv -> pip install -> PyInstaller ->
packages/meshbay-client/node-runtime/ (gitignored)
build-win.ps1 Node>=22 check, npm ci, Electron bump, sync-ui,
node runtime, electron-builder --win nsis
bump-electron.mjs the Chromium-CVE "build against latest Electron"
policy, out of the PS script (5.1 here-string terminator rules)
README.md
PyInstaller, not the python-embed zip: the frozen meshbay-node.exe is a
genuine relocatable single binary, which is what src/main.js:findNodeBinary
spawns (process.resourcesPath/node-runtime/meshbay-node.exe when packaged) and
what the W3 autostart launcher points at. The embeddable zip needs pip to make
that wrapper and the wrapper bakes in an absolute interpreter path.
build/installer.nsh: on uninstall, taskkill meshbay-node.exe and delete the W3
Startup .vbs (it would point wscript at a deleted binary every sign-in).
%LOCALAPPDATA%\meshbay\ — node.toml, keystore.enc — is never touched.
ffmpeg is not bundled by default (node finds it on PATH); build-win.ps1
-FfmpegDir copies ffmpeg.exe/ffprobe.exe in for a self-contained installer.
Verified on the Windows guest: PyInstaller freeze builds first try
(node-runtime 147 MB), frozen `meshbay-node status` talks to the live daemon's
loopback API; electron-builder --win nsis produces MeshBay-Setup-0.1.0.exe
(155 MB), oneClick/perMachine flags applied, node-runtime bundled at the path
findNodeBinary expects. test_packaging_win.py (14) pins the config invariants
and the NSIS <-> platform.py autostart seam. Node suite 798 pass / 34 skip.
Open: Authenticode signing (13.9 — unsigned => SmartScreen), Windows CI
(18.3), electron-updater. First clean-machine install + DPAPI + autostart
round-trip is a manual check.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The Linux node runs under `systemctl --user`. Windows has no per-user
equivalent that works without elevation: `schtasks /create /sc ONLOGON`
(even `/rl LIMITED /it`) fails with "Access is denied" for a non-admin
user, because a logon trigger touches machine-wide scheduler state.
So autostart is a `.vbs` in the per-user Startup folder instead:
CreateObject("WScript.Shell").Run Chr(34) & "<exe>" & Chr(34), 0, False
wscript runs it at every sign-in, hidden (0) and non-blocking. No admin,
no console window, no new dependency. Verified end to end: the launcher
brings the daemon up with no window and it answers its loopback API.
node/platform.py
autostart_install/remove/status — write / delete / detect the launcher
autostart_run/end — start now (DETACHED|NO_WINDOW) / taskkill
_node_exe — PATH, then next to sys.executable, then argv[0]
node/daemon.py
new `autostart install|remove|start|stop|status` verb
reload (win32) -> POST /api/reload on the loopback API
restart-daemon (win32) -> autostart_end + autostart_run
reset (win32) -> also removes the launcher
client/main.js, preload.js
node:autostart handler + winAutostart* helpers (kept in step with platform.py)
node:service-status (win32) probes the daemon; stop/restart/start use
taskkill + a detached, windowless spawn
Tests: 8 autostart cases in test_platform.py (mocked sys.platform, APPDATA
pointed at tmp); `autostart status` added to the CLI dispatch sweep. Full
meshbay-node suite green on Windows (784 passed / 34 skipped).
Still open: no CTRL_CLOSE_EVENT handler, so a bare taskkill / window close
does not run _shutdown() (SetConsoleCtrlHandler, follow-up). Service mode
(pywin32/NSSM) stays Phase 2.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Verified end to end: a live browser peer on Windows connecting to a Windows
node — handshake, index sync, file download and an ffmpeg-transcoded video
stream all work on the ProactorEventLoop. aiortc only hangs on it in the
same-process loopback the tests use, which the repo-root conftest already
handles for the suite.
So the daemon no longer forces the SelectorEventLoop: that fixed
aiortc-in-one-process but broke ffmpeg (no subprocess support on a Windows
SelectorEventLoop). `use_compatible_event_loop()` becomes
`configure_event_loop()` — a no-op unless MESHBAY_NODE_EVENT_LOOP=selector
is set explicitly, as an escape hatch that probably never needs pulling.
This drops the planned "move ffmpeg off the asyncio loop" work.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Found by running the daemon on Windows for the first time:
- `meshbay-node init` wrote `unlock_file = "C:\Users\..."`, and
attach_group / add_root write `path = "C:\..."` — a raw Windows path in a
TOML basic string is a parse error (`\U`, `\a`, ... are escape sequences),
so the config would not load. All now write `Path(...).as_posix()`;
pathlib reads the forward-slash form fine on Windows.
- any `print()` carrying a `->` arrow or em dash (the CLI help and messages
are full of them) raised UnicodeEncodeError on a cp1252 console and took
the command down. New `platform.force_utf8_stdio()` reconfigures
stdout/stderr to UTF-8, called at the top of `main()`.
Verified on Windows: init writes parseable LF node.toml, the keystore
Argon2-decrypts, the loopback control API binds 127.0.0.1, and
`_update_node_toml` reads a CRLF file and rewrites it LF-only with its
standalone comments intact. Two regression tests added in test_ops.py.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- `.read_text()` on source files now `encoding="utf-8"` — cp1252 chokes on
the em dashes / box-drawing chars those files contain.
- test node.toml templates embed paths via `Path.as_posix()`: a raw Windows
path in a basic TOML string is a parse error (`\U`, `\a`, ... are escapes).
- new `test_platform.py` covers `meshbay_node.platform` by mocking
`sys.platform` / `os.environ` — runs on both OSes.
- `skipif(sys.platform == "win32")`, in `conftest.needs_subprocess` and
inline, for the documented gaps: ffmpeg/ffprobe via asyncio subprocess
(the win32 selector loop, forced for aiortc, cannot spawn one), the
systemd `reload`/`restart-daemon` delegation (Windows path is W3), the
keystore `st_mode == 600` assertion (NTFS ignores mode bits), and the
symlink-escape test (needs Developer Mode).
Windows: 781 passed, 25 skipped. No change on Linux.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`index_sync`, `index_delta` and the `handshake_ack` config payload now travel
sealed under a GEK-derived subkey (`meshbay_common/groupbox.py`, mirrored by
`sealGroup`/`openGroup` in `crypto.js`). Only `type`, `v`, `group_id` and the
ack's `node_pk`/`proof`/`sig` stay in clear — a receiver must route and
authenticate before it would trust a decryption. Verify, then decrypt.
The ack line is integrity, not confidentiality: the signed handshake transcript
names no ack field, so `is_node_admin`, `enabled_apps`, `video_root` and the
rest were authenticated by the DTLS channel alone. The index line is defence in
depth against a repeat of C1/C6 — a peer served before the handshake completes
now gets ciphertext, not filenames. Nothing against an observer, the hub, or a
member; that is the whole claim. `index_progress` stays clear (D3, counters
only). Chat is out of scope.
Failure is fatal: a payload that does not open ends the session naming the
message type — never an empty index or an empty `enabled_apps`, both of which
are legitimate states.
Version negotiation ships here too (phase 15.6, brought forward): `v` + `v_min`
on `handshake` and `handshake_challenge`, refused with `version_too_old` /
`version_too_new` / `version_unreadable`. The flag day was already being paid
for; the next breaking change now costs a refusal message.
BREAKING CHANGE: breaks the WebRTC wire every deployed client speaks. Hub and
every node must deploy together; the SPA is served by the hub, so a browser
picks up the new client on reload. See MESHBAY_NODE_PROTOCOL.md §11.1a, §13.1.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HkzbhmMmK8PqQBtGz5zCvY
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Reported live: after installing the .deb, systemd printed "Warning: The
unit file, source configuration file or drop-ins of meshbay-node.service
changed on disk. Run 'systemctl --user daemon-reload' to reload units."
Both postinst scripts (deb and rpm) already run a daemon-reload, but only
for the system manager — they run as root, and the unit that changed is
the *user* unit (packaging/systemd/meshbay-node-user.service), owned by
each signed-in person's own user manager, a different process root
cannot reach. Iterating over logged-in users from postinst was
considered and rejected: fragile (depends on machined and each user's
session bus), and root has no business doing a user's job.
`_systemctl_user` — the one place `reload` and `restart-daemon` already
shell out to systemd — now reloads the user manager first, under the
correct privilege, right before the verb that would otherwise act on a
stale unit. Best-effort and unchecked, like the postinst's own
daemon-reload: a reload the manager did not need must never block what
the operator asked for, and systemd still reports a genuine failure from
the verb itself.
Does not touch the postinst scripts. On a package upgrade the warning
can still appear once, before the next reload/restart-daemon (or a login,
which starts a fresh user manager that reads the current file); this
closes it from the CLI's own lifecycle commands rather than reaching
into every session from root.
test_lifecycle_commands_delegate_to_systemctl_user now expects the
daemon-reload call ahead of the verb — checked failing against the
previous code.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AbwJDbNTkiRUh7HTWEoyss
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`file_chunk` and `index_sync` were each built twice, once per transport, and
the two copies did not agree. WebRTC sent binary, unsigned chunks carrying a
`file_id`; QUIC sent base64 fields, two BLAKE3 hashes, a per-chunk Ed25519
signature and no `file_id`. `index_sync` was plain entries on one transport
and a `GroupIndex.serialize()` envelope on the other. One message type, two
shapes, one consumer each, and nothing that failed when they drifted — finding
C6 one size down, in the two places the handshake unification did not reach.
Phase 9.15 moved WebRTC to the binary format and dropped the per-chunk
signature; the QUIC encoder was never brought along. It is dropped here rather
than reintroduced: the AES-GCM tag authenticates the ciphertext under a
GEK-derived key, and since C3 the node authenticates itself once in the
handshake instead of once per megabyte.
`meshbay_common.protocol` now owns the chunk codec (`chunk_ciphertext`,
`file_chunk_wire`, `file_chunk_plaintext`) and `meshbay_node/transport/wire.py`
the index builder, which also absorbs the delta the daemon used to hand-build.
`test_transport_wire_parity.py` fails if either server grows its own copy back.
`ChunkRequest`/`ChunkResponse` are deleted. `ChunkResponse` described the QUIC
half while reading like the contract for both, which is what made the fork hard
to see at all.
BREAKING CHANGE: MNP 0.15 changes the encoding of `file_chunk` and `index_sync`
on the QUIC transport. The WebRTC shapes are byte for byte unchanged and no
QUIC client ships, which is why this is a MINOR bump; a deployed QUIC peer
would have made it MAJOR.
Also fixes a test fixture that put a `Path` where the daemon puts a `RootSet`.
Nothing caught it: the old QUIC index handler never touched `roots`, and
`entry_abs_path` fell through `Path.resolve(strict=...)`, reading the virtual
path as a truthy flag and returning the right file by accident.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AsoWC3GmhNdwVFomW3QjH3
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
test_each_unit_is_installed_where_it_can_run read meshbay-node.spec's
%install for `install -D` lines and their destination on the following
line. The packaging overhaul (2026-08-31) replaced that section with
`cp -a %{_staging_root}/* %{buildroot}/`: the spec no longer places
individual files, build-node.sh does, and the spec only declares them in
%files.
So the test failed against packaging that was correct all along — it was
checking a mechanism that no longer existed while the property it
defends still held. Both units do land where they can run:
build-node.sh:71-76 copies meshbay-node.service to
/usr/lib/systemd/system/meshbay-node@.service and
meshbay-node-user.service to /usr/lib/systemd/user/meshbay-node.service.
It now reads that script. Same guarantee, aimed at the thing that does
the work: the template — the one carrying User=%i — into the system
directory, and the user unit, which cannot carry User=, into the user
one. Checked against three reintroductions of the original defect:
swapped destinations, the user unit dropped from staging, and the
template renamed.
Not verified here: %{_unitdir} and %{_userunitdir} really expanding to
those paths. There is no rpm on this machine, so that comes from the RPM
convention rather than from `rpm --eval`.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AbwJDbNTkiRUh7HTWEoyss
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`create_invite` wrote the invite to the roster and *then* asked for the
hub. An unreachable hub therefore raised "Hub not connected" after the
code was already stored: the operator saw an error and no code, and a
valid invitation sat in the roster that nobody had been given. Every
retry left another.
Registering first means a failure costs nothing — no code exists to be
orphaned. A membership row without an invite is harmless: without the
code there is still no group key. The endpoint is idempotent (`if not
mem: db.add(...)`, no 409), so the SPA registering the same membership
again right after createInvite costs nothing either.
The registration is now fatal rather than swallowed, which is the part
that matters. `/v1/groups/mine` joins GroupMember, so someone who was
never registered does not see the group at all and can never redeem the
code. Tolerating that failure handed the operator a code that cannot
work and said nothing — a worse outcome than the error, because it is
silent. Skipped only when there is no username to register with: the MNP
path allows an empty one and there the SPA is the one that registers.
Found by test_invite_then_join_delivers_the_gek, whose fixture had no
hub and which passed only because the failure was swallowed. It has one
now. And 0443cf8 added this registration to the CLI path without any
test asserting it happened, which is how it came to be skipped whenever
the hub was merely absent — test_cli_invite_asks_the_hub_for_an_account_
never_a_key checks it now, and
test_an_unreachable_hub_leaves_no_invite_behind covers the orphan
(verified failing against the previous ordering).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AbwJDbNTkiRUh7HTWEoyss
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Opening a different season of the same show moved everything under the
synopsis, which is where the season control and the episode list are, so the
thing just clicked was no longer under the pointer.
- The synopsis is exactly three lines for a multi-season show, with a "read
more" link floated into the third line box (-webkit-line-clamp only ever
puts its ellipsis at the end of the last line and leaves no room after it).
Clamped from above and pinned from below to the same number: a constant,
not a range — a season summary runs two lines and the next one twelve, and
a band still reads as a jump. Whether three lines is all of it depends on
the modal's width, so it is measured in the browser and re-measured on a
resize.
- The cast is clamped to two lines.
- SeasonMenu replaces SeasonTabs: the tab row scrolled sideways once a show
had more seasons than fit, which is close to unusable on a phone. One
trigger reading "Season 5 · 1997" and a menu of every season with its
episode count, one row high whatever the season count.
- media_meta_resp.director was filled from the credits crew's job ==
"Director", a movie shape. TMDB's aggregate tv_credits crew is routinely
empty and never carries that job, so every show answered null and the modal
dropped the line. It now comes from created_by on the show details. Cached
show metadata keeps its null until TMDB_META_TTL_SECS expires or an
operator re-matches.
The facts line is joined rather than concatenated (a title with no rating
used to open with " · ") and carries the show's own year next to the
director; the selected season's air year moved onto the picker.
test_video_detail_measured.py asserts rectangles through layout_probe.py, not
declarations: the picker's offset inside its own modal body is the same pixel
either way, the synopsis and cast heights, where the read-more link lands,
and the open menu at 320 px. Each measured block sits in a whole-pixel-height
container, or two identical layouts an eighth of a pixel apart round to tops
one pixel apart. test_tmdb_show_director.py covers the credit.
docs/mediacenter.md §10.4.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014UtzVrzM7e2tG9fSpkR9ML
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The link-preview fetch is an outbound request to an address a member
chose. safe_url() already blocked non-public addresses and re-checked
each redirect hop; this adds the parts that were missing:
- Rate limit. `_do_link_preview_request` was reachable by any member
with no ceiling, so a member — or a hub minting tokens for many
accounts — could drive unbounded outbound HTTP from the operator's
machine (amplification / DoS / on-demand IP disclosure to arbitrary
hosts). Now bounded per connection (15) and node-wide (60) over a
60 s window; only a real fetch counts, a cache hit is free, and over
the ceiling the reply is a plain `ok: false` (bare link), not cached.
- Port allowlist. safe_url() passed `parts.port` straight through, so
a member could aim the node at `http://<public-host>:<any-port>`.
Restricted to {80, 443, 8080, 8443} — every real OpenGraph page,
none of SSH / mail / DB / cache / search / admin ports.
- DNS rebinding. The connection's actual peer address is now
re-checked against the public-address rule (`_reject_if_rebound`),
so a name that resolves clean and then to something internal does
not get its body read. Best-effort (no `network_stream` extension,
no check); a full literal-pin is noted as remaining hardening.
- Decompression bomb. `_downscale` now refuses an image whose header
dimensions exceed ~40 MP before convert()/thumbnail() decode it.
Third security review, finding M3.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011pG75yGK3NthNfyjH74omG
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The QUIC MNP listener was started unconditionally whenever aioquic was
importable — but nothing speaks QUIC: the browser and desktop clients
use WebRTC, QuicChunkClient has no production caller, and the hub-less
`group://` sidecar (D9) is unbuilt. So on every node it was an open
UDP port with no client and no working NAT traversal (`punch_nat()`
is a direct-connection helper, not a traversal stack).
daemon startup now gates QuicChunkServer on
`self._config.node.quic_enabled` (default False; `MESHBAY_QUIC_ENABLED`
overrides). The generated node.toml templates (config.py, the CLI, the
desktop client) carry the line, commented for what it is.
Removes the exposure the third review's M2 lives on until a QUIC
client exists; the parity fix for the handlers themselves is the next
commit.
Third security review, finding M2 (mitigation).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011pG75yGK3NthNfyjH74omG
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove the node daemon's server-rendered admin UI (GET / and /audit, the
_render_* helpers and inline templates) and the `meshbay-node ui` CLI verb.
The loopback control API stays; it is now JSON only, ruff-clean, and 453
lines (was 1074). Also drop three never-wired endpoints (/api/config,
/api/chat/history, /ws/chat, plus broadcast_chat) and the pointless
18000/tcp firewall profiles.
The desktop client's Node page (static/node-page.js) takes over what the
dashboard showed, reorganised into six tabs (Overview, Groups, Roster,
Peers, Audit, Settings):
- Overview: version, node id, QUIC port, hub, index-cache maintenance
- Roster: node-wide view with unpin
- Peers and Audit: auto-load on open, no Load button
- Audit: real usernames and group names (resolved from the roster and
node.toml), Previous/Next pagination newest-first, Export CSV of every
matching row
- Settings: node settings, STUN, ICE, denylist, then Unlink from hub
Backend: audit.get_entries gains `offset`; /api/audit and /api/peers
resolve ids to names via a new _display_names helper; CSP tightened to
default-src 'none' now that no HTML is served. draft-v6 sections 2.11 and
2.12 corrected -- the Node page uses the loopback API, not MNP.
One capability is intentionally dropped: browser-based admin on a headless
server. The CLI covers every operation there.
See docs/refactor-node-ui.md.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MQCaZnde4Bjjdu84dhSuF5
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
aiortc's connection_kwargs() keeps only the first STUN URI from
RTCConfiguration.iceServers ("only a single STUN server is supported"),
and aioice.ice.Connection has a single stun_server field. So the node's
four default STUN servers -- and anything added on the Node page or with
`meshbay-node stun add` -- collapsed to stun:stun.l.google.com:19302. When
that one server was slow or unreachable from the node, ICE gathering
(get_component_candidates, timeout=5) burned its full 5 s with no
server-reflexive candidate, adding seconds to every browser connection.
The multi-server fallback of draft-v6 s2.12 was configuration only.
transport/stun_multi patches aioice.ice.server_reflexive_candidate (same
monkey-patch technique ice_filter.py uses on get_host_addresses) so a
single ICE gather races the STUN binding request against every configured
server on the one bound socket and takes the first answer. One reachable
server anywhere in the list now yields a reflexive candidate in one RTT.
- daemon: install_stun_multi() alongside install_ice_filter()
- ops.set_node_settings: push the list to stun_multi.set_servers() so the
CLI / Node-page hot-swap takes effect without a restart
- webrtc_server.handle_offer: log ICE gather time and srflx count
- test_stun_multi.py: fan-out, first-answer-wins, all-fail, empty-list
fallback, DNS failure
Verified end to end with a real RTCPeerConnection: with a black-hole STUN
server first in the list, gathering still completes in ~0.07 s with full
srflx candidates (previously a 5 s stall).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BSsQhfxEAhwi4nqc4hASmq
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The passphrase derives two independent client-side values: auth_key (the
hub verifier) and bundle_key (AES-GCM key for the per-node identity
bundles, which live on nodes and never on the hub). Changing or
recovering a passphrase is therefore two operations — swap the hub
verifier, and re-wrap every reachable node's identity bundle.
Flow A — change a known passphrase (Profile page)
- POST /v1/users/password re-proves the current passphrase, swaps
pw_hash/salt/version, revokes every refresh token and returns a fresh
pair so the tab that made the change stays signed in.
- MeshBayTransport.rewrapAllNodes: for every group's online node, connect
with the old key, read the identity off the handshake, store it back
under the new key. Returns updated / unreachable / failed so the UI can
point at the operator-unpin fallback for the gaps. Always-shown
confirmation dialog listing reachable and unreachable groups.
Recovery key
- keyderive.js generateRecoveryKey (32 random bytes, grouped Base32) and
deriveRecoveryKey (HKDF-SHA256, domain meshbay:recovery:v1:<username>).
- Every per-node identity gets a second copy wrapped under the recovery
key: keypair_bundles.bundle_enc_recovery (node-only column, added in
_SCHEMA_KEYPAIR and via a PRAGMA-guarded ALTER for existing DBs),
carried on keypair_bundle_store / _resp. MNP 0.13 -> 0.14, additive.
- session.recoveryKey is persisted in IndexedDB (slot rk) and lazy-loaded
on connect, so a group joined in any later session still leaves a
recovery copy.
- Shown once at registration; optionally folded into the verification
e-mail as a pass-through the hub never stores or logs, with an opt-out.
- Profile -> Recovery key re-loads R and backfills every reachable node
via rewrapAllNodes in bundleKey mode (no passphrase re-entry).
Flow B — recover a lost passphrase (#/reset, linked from sign-in)
- POST /v1/users/password/reset-request {username, email}: both must be
the pair on file, checked against the blind email_hash (never
decrypted). A mismatch — wrong e-mail, unknown username, non-active
account — takes the identical no-op path (no code, no mail, same 200),
so it reveals nothing and cannot be used to spray reset mail from a
username alone. 5/min, 1-hour single-use code.
- POST /v1/users/password/reset {username, code, new_auth_key}: same
expiry / attempts / single-use checks as e-mail verification; revokes
every session and deletes every registered device key so a stored one
cannot sign back in past the reset.
- ResetPasswordPage: request code -> code + optional recovery key + new
passphrase -> reset + sign-in -> fan-out. connect() falls back to the
recovery-wrapped copy when the passphrase key cannot open bundle_enc.
Without a recovery key: sign-in is restored and each group needs the
operator-unpin fallback.
Supporting fixes (found in live testing)
- member unpin now also deletes the keypair bundle; connect() mints a
fresh identity when handed a bundle it cannot open (unless _rewrapOnly,
set by rewrapAllNodes), so a rejoin completes instead of dead-ending
before the invite-code prompt.
- A browser with no bundle key gets a passphrase prompt on the group page
instead of a "go back to the browser you registered on" message.
- RegisterPage / LoginPage / ResetPasswordPage trim the username so every
key derivation matches the hub's stored form.
Docs: docs/auth-confirm.md. Locale keys across all ten catalogues.
Tests: test_password_change, test_password_reset, test_recovery_email,
test_recovery_key, test_rewrap_fanout, test_bundle_store_recovery, plus
additions to test_admin_ops_mnp and test_webrtc_transport. Hub suite 492
passed; node suite 741 passed (the lone test_packaging_units failure is a
pre-existing RPM-spec flake, reproducible on main).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GGkxJW9br8Y9bhT8ywJ3oc
|
| |
|
|
|
|
|
|
|
|
| |
The WebRTC transport relied on a single Google STUN server — if it was
unreachable, ICE gathering waited the full 4s timeout. Now four public
servers are used by default (Google ×2, Cloudflare, Mozilla), configurable
via node.toml, the Node page UI, and the CLI (meshbay-node stun list|add|
remove|reset). Changes are hot-swapped on the live transport.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Real franchise / show / release-group names had crept back into test
fixtures, code comments, a docstring and docs/mediacenter.md while fixing
the saga-match and misclassification bugs. Replace them all with invented
placeholders ("Some Saga", "A Different Show") and shape descriptions
("a franchise-origin film", "a 3-season show"). Behaviour and assertions
unchanged; 738 node tests still pass.
Record the rule in CLAUDE.md so it stops recurring.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018BMLQjqFGCize2KtNBT79v
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Every "<Saga> Episode <N> - <subtitle>" file in a numbered franchise
resolved to the series' first entry (a real, older film). `sequel_variants`
stripped "Episode <N>" and offered the bare "<Saga>" as a candidate query;
that matches the first film's original_title at ratio 1.0 and beat PASS 1's
correct-but-lower hit. A franchise's bare name is very often a real,
different film.
When a Part/Episode/Chapitre/… keyword carried the index, sequel_variants
no longer emits the bare base — only "<base> <digit>" and "<base> <roman>".
Without a keyword ("<Franchise> 3") the bare base is still offered, so that
fix is untouched. Verified live against TMDB: the franchise's episodes each
resolve to their own entry; the earlier numbered-sequel, two-part-film and
franchise-subtitle regressions all hold.
docs/mediacenter.md §10.3.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018BMLQjqFGCize2KtNBT79v
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Found on demo35: "Some.Film.2017.MULTI.108.grp.mkv" — the release name's
"1080p" truncated to "108" — makes guessit read S01E08, so enrich.py's
flat-library branch (elif ep.episode is not None) filed a standalone film
as a series. "Fix match" then only offered TV results for the phantom
show, so there was no way out from the UI.
- title_parse.has_episode_marker(): true only for an explicit SxxExx /
1x08 / "Episode N" / "Season N" token, not a bare 3-4 digit run.
- enrich.py: the flat-library branch now needs ep.season AND ep.episode,
plus either a real marker or the absence of a "(2019)"-style year.
Every genuine flat-dumped episode in the corpus carries a marker, so
real shows are untouched; the same misparse on "1280" ("...2013.1280...")
is covered too.
docs/mediacenter.md §10.2. Known gap left open: no operator control over
the movie/show kind itself — a "this is a movie / a show" toggle would.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018BMLQjqFGCize2KtNBT79v
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Root of the 2026-08-29 demo35 storms. `_do_media_meta_request` could not
tell "this is a movie" from "this video isn't enriched yet" — both have
season/episode None — so during a slow initial scan with a browser on the
Videos tab, every show episode requested was run through the *movie*
search path with its raw filename as the query
(`search/movie?query=Show S01E01 1080p WEB DL ...`), hundreds per second,
until TMDB rate-limited and posters stopped loading. Worse, an
un-enriched show episode's own valid cached "tv" match was treated as
stale (its provisional kind was "movie"), so a file already resolved got
re-queried anyway.
- While a video is un-enriched (no display_title — enrich.py always sets
one), never run a TMDB *search*. Serve the cached match if the content
hash has one, honouring the cached kind ("tv"/"movie") rather than the
provisional split; otherwise answer confidence 0.
- Once enriched, the strict `cached_media_type == media_type` check is
unchanged: an enrichment fix that reclassifies a folder movie->tv still
drops the stale match and re-resolves.
- video-app.js: `useMediaMeta` gains an `enrichSig` dependency
(`entry.display_title`) so the client refetches once the enriched fields
arrive on an index delta — the fileId is a content hash and never
changes, so nothing else would retrigger it.
Not caused by the V8-V13 work; it raised the per-file call count so the
pre-existing race became a visible storm.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018BMLQjqFGCize2KtNBT79v
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A one-click alternative to the full "Fix match" search-and-pick flow, and
reachable without SSH (`meshbay-node video rematch` clears a whole group).
- MNP 0.13: tmdb_rematch / tmdb_rematch_ack (additive — an older node
logs "unknown type", the button just does nothing). OP_TMDB_REMATCH,
signed like tmdb_override (media_cache is shared node-wide).
- media_cache.drop_tmdb_match(file_id): forgets the match AND the
override marker — deliberately stronger than clear_file_tmdb, since the
operator is explicitly asking for a fresh resolution.
- webrtc_server: _do_tmdb_rematch / _admin_exec_tmdb_rematch, dispatch +
admin-response routing, broadcasts tmdb_rematch_ack.
- transport.js: rematchTmdbMatch(fileId, signFn); 'tmdb_rematch' in the
admin-op allowlist; tmdb_rematch_ack handled like tmdb_override_ack.
- video-app.js: a "Re-match" button beside "Fix match" in the detail
modal (isNodeAdmin), then bumpMediaMetaGeneration(). video.rematch_one
key in all ten locales.
docs/mediacenter.md §10.1: V8–V13 marked done.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018BMLQjqFGCize2KtNBT79v
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
sequel_variants
V8: the TV/show branch of _tmdb_search used the old "first candidate over
0.6 wins" shape. It now shares one _tmdb_ladder helper with the movie
branch — score every candidate query, keep the best, fast-path a
confident primary hit. A year lifted off the show's folder name
(title_parse.year_in, e.g. "Some.Show.2022.S01") rescues a sub-0.6 hit
that lands on the exact year. title_parse.clean_query de-dots a
folder-derived title without naive_title's extension-stripping trap.
V9: _best_match gains an optional `year`. When the top result is not a
confident textual hit (ratio < 0.6) and a year was requested, a
different result of that exact release year is preferred — TMDB already
year-filtered the search, so this is a hard corroboration, not the fuzzy
re-rank §3.3 warns against. A confident top hit is never overridden.
search_movie/search_tv forward the year.
V10: sequel_variants widened — trailing Roman→digit as well as
digit→Roman, spelled-out indices (one..twelve / un..douze / ordinals),
and a "Part N" / "Chapitre N" wrapper. Still empty for a trailing word
that is not an index or a 4-digit year.
V11: when the primary hit is already decent (>= 0.6) and there is nothing
more specific to try (no alternative_title, no sequel variant — only a
punctuation restatement left), the ladder returns without the extra
requests. The clean-title common case is back to one call.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018BMLQjqFGCize2KtNBT79v
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A batch of wrong poster-grid matches found live on a real library
(2026-08-29): a two-volume film's second part matched the first; a
numbered sequel matched a same-year making-of documentary; several
entries of one franchise matched a single early entry whose localized
TMDB title is the franchise name; one matched nothing. One mechanism:
_tmdb_search returned the first candidate query whose title-similarity
ratio merely cleared 0.6, before alternative_title / the Roman-numeral
variant was ever tried.
Matching:
- title_parse: fold guessit's volume/part number back into display_title
so the parts of a multi-part film stay distinct in the query, the card
and the override.
- _tmdb_search: keep a strong PASS 1 fast path (ratio >= 0.85, one
request), otherwise score every candidate query and pick the best. A
year-exact rescue lifts a sub-0.6 top hit to the confidence floor only
when TMDB's own year-filtered result lands exactly on the filename's
year. No local re-ranking of any single result list; no tmdb.py change.
Fix match / rematch:
- _admin_exec_tmdb_override: a movie override touches its own file only
(guessit gives a whole franchise one display_title); a show override
still fans out. Corrected files are marked in media_cache.tmdb_override.
- media_cache: tmdb_override table; clear_file_tmdb / clear_tmdb_matches
drop auto-resolved matches while sparing manual corrections.
- ops.rematch_video + `meshbay-node video rematch` (loopback endpoint +
CLI verb): re-resolve a group's video matches after a matcher fix.
file_tmdb is keyed by content hash and otherwise only pruned on
deletion, so nothing dislodged a cached match before.
- a rename now drops the stale auto match too (daemon
_reenrich_renamed_video_entries).
UI:
- VideoDetailModal shows the source filename and resolved TMDB id; an
unmatched poster gets a badge (3 new video.* i18n keys x 10 locales).
So a wrong match can actually be identified before hitting Fix match.
docs/mediacenter.md 10.1 records this and the V8-V13 follow-up backlog
(show-branch ladder, year-aware _best_match, wider sequel_variants, the
0.6-0.85 extra calls, movie grid merge, per-card rematch).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018BMLQjqFGCize2KtNBT79v
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Wizard (Electron):
- Auto-provisions node config (hub URL + username) from logged-in user
- node:start handles both cold start and restart of misconfigured daemon
- Waits for daemon to reach 'running', auto-links node key on hub
- probeNode accepts intermediate states for wizard progress feedback
Reset (meshbay-node reset):
- Unlinks node key from hub (DELETE /me/node_key, best-effort)
- Stops and disables daemon (systemctl --user disable --now)
- Erases ~/.config/meshbay, ~/.local/share/meshbay, ~/.local/state/meshbay
MusicBrainz contact:
- Resolved from owner's hub email instead of per-node roster config
- Removed musicbrainz_contact UI and WebRTC handshake field
- Removed set_musicbrainz_contact/musicbrainz_contact from roster
Node pairing:
- Added operator pairing banner on NodePage
- Added operator_paired flag to list_groups
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Regression from device linking (Stage C, 2026-08-18). Once a device is
pinned on a node — as a member of one group, or an operator pairing — the
`known` fast-path in `_do_join_request` dropped straight into `_join_ok`.
For any *other* invite-only group it had no roster row for, that answered
`not_authorized_for_group` and stopped there: the client never got
`code_required`, so the pairing-code form never appeared and a legitimately
invited member could not join.
The `known` branch now, when there is no membership for the group being
opened:
- with a valid code → consumes the invite and admits (as the unknown-
device path already does);
- with no code but an invite waiting for this user here → `code_required`,
so the client prompts;
- with no code and nothing inviting them → `not_authorized_for_group`,
unchanged, so the H3 guarantee (a hub-invented pin gets no key) holds.
Also fixed: the group's own roster row is now consulted first, so an
existing member opening their group is never mistaken for a stranger.
Tests in test_roster_pairing.py cover all three branches plus the H3 guard.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018gKJ85aZyvEwarXMFzFEwi
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Paste an http(s) link in a group's chat and it unfurls into an OpenGraph
card — title, description, site name, and image — the way WhatsApp/Signal/
Slack do it.
The fetch is the node's, never the browser's or the hub's. The browser
cannot: a strict img-src/connect-src and CORS block it, and a direct fetch
would leak every reader's IP to the linked host on each render. The hub must
not touch group content (draft-v6 §2.5). The node already fetches third-party
metadata for the Videos and Music apps, over the same authorised path.
Flow mirrors media_meta_req: the client sends `link_preview_req {url}`, the
node replies `link_preview_resp` with the card fields (or `ok: false`), and
any OG image is stored under its blake3 in the existing media_cache thumb
store — the client then fetches it via the normal file_req path, exactly like
a poster. Nothing durable is added: the card text lives in a bounded in-memory
TTL cache on the node (draft-v6 §2.7 — enrichment on demand, the asking device
caches), and MNP goes 0.11 → 0.12 (additive: an older node logs "unknown type"
and the client shows the bare link).
Because the URL is chosen by a *member* and triggers an outbound request from
the operator's machine, `linkpreview.safe_url` is an SSRF gate: http(s) only,
no credentials, and every resolved address must be globally routable — no
loopback, private, link-local, multicast or reserved range, cloud-metadata
included. Redirects are followed by hand so each hop is re-checked. Residual,
documented in the module: DNS rebinding between the check and connect, closed
properly by pinning the checked IP — a follow-up.
Also fixes a long-standing chat annoyance the preview cards made worse:
opening the Chat tab landed a screen or two above the newest message because
the scroll-to-bottom ran before attachment thumbnails and (now) preview cards
had loaded and grown the content. A ResizeObserver keeps the view pinned to
the bottom through late content growth, and does nothing once the reader
scrolls up.
Tests: test_linkpreview.py (the SSRF gate and the OpenGraph parse, incl.
redirect re-validation and image downscaling) and test_link_preview_request.py
(reply shape, the media_cache image round-trip, the result cache).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018gKJ85aZyvEwarXMFzFEwi
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
merge various-artists compilations into one album
Two real, confirmed bugs in a large flat music library:
- enrich_audio.py's sibling-cover fallback assumed one folder is one
release. A large flat "chart ranking" folder mixing dozens of unrelated
artists carried several distinct WMP AlbumArt-cache guids (one per
original album a track was ripped from), and the fallback picked
whichever one WMP had copied to Folder.jpg — attaching one unrelated
release's cover to every other track in the folder. Now refuses to pick
a cover at all once 2+ distinct guids show up, rather than guess.
- music-app.js's groupMusicEntries grouped by artist first, album second,
so a various-artists compilation (many genuinely different per-track
artists, one shared album tag, no album-artist tag at all — a real
~20-track soundtrack rip has exactly this shape) could never be
recognized as one release: every track landed alone in its own artist's
bucket and got folded into a singleton pile. Now detects an album key
shared across 2+ distinct artist keys and merges those tracks into one
compilation card under a "Various" heading instead.
Both verified against real, previously-affected files and live in the
browser: the shared wrong cover is gone, and the compilation renders as
one card with all its tracks in order.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Found live: "fix match" appeared to work for two shows but not for a movie
whose own automatic search kept landing on the same wrong result. The
override only ever recorded the file->tmdb_id mapping — never the
metadata that id actually names. _do_media_meta_request's cache check
agrees the mapping is fresh (same media_type) but finds nothing under
that *new* id in tmdb_meta, since nothing had ever fetched it, and falls
through to a brand-new search using the file's own title — reproducing
the exact match the override was meant to replace.
This stayed invisible for the two shows only because their own title
happened to be enough for that fallback search to land on the right
answer anyway, entirely independent of whatever the override recorded —
never because the override was actually being honored. It surfaced on a
movie whose own title search kept landing on the same wrong match
regardless.
Fetches and stores the real metadata for the chosen tmdb_id up front (via
the existing _tmdb_build_meta, which needs only the id — no search result
object required), so a later lookup finds the override itself instead of
falling through to a search blind to it.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Found live: a real show organized its first season as "House.of.the.Dragon.
S01E01...mkv" inside a folder named "S1" (the show name embedded in every
filename, so grouping worked by guessit's own title alone), but its later
seasons as "S02E01. Episode's Own Title.mkv" inside "S2"/"S3" — no show
name in any filename at all, relying entirely on the folder. Those seasons
showed up as loose individual entries instead of grouped under the show:
season_from_folder_name only recognized "season"/"saison"/"livre" as full
words, so "S2" didn't register as a season folder at all, and the
ancestor-based show-grouping fix (previous commits) never triggered for
those seasons.
A bare "S" + 1-2 digits as the *whole* folder name is now recognized too —
anchored to the entire name so it can't match some unrelated folder that
merely starts with "s" followed by digits.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
episodes
1. A season spanning more than one folder (a per-book Bonus folder nested
inside every numbered season) got the same synthetic episode numbers
handed out again in each folder independently — three unrelated
Specials all showing up as "S0E01". _synthetic_episode_number now ranks
across the whole show for the target season, not just one file's own
folder.
2. guessit reads a bare 3-digit leading episode number as a concatenated
season+episode guess rather than a plain episode number — "100" parses
as season=1, episode=0, not episode=100, with nothing in its output
distinguishing that from a real 2-digit episode. A season-like ancestor
already overrides guessit's season (previous commit); this applies the
same fix to episode via a direct regex on the leading number, capped at
3 digits so a leading year (4 digits) is never misread the same way.
Both confirmed against the real library this whole fix was found on:
per-book Bonus features across two books no longer collide, and a real
100th-episode file now resolves to episode 100 instead of 0.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
guessit title
The mechanism itself was wrong, not just the TMDB matching: a bare episode
numbering convention with no show name in the filename at all
(`001 Episode's Own Title.ext`, no SxxExx, no show prefix — entirely
ordinary on its own) makes guessit invent a "title" from whatever text
follows the number. That text is the individual episode's own name, and
differs for every episode in the folder — trusting it, as the code did,
groups nothing together at all: every episode became its own single-
episode "show", searched against TMDB by that one-off title alone.
Whenever a season-like ancestor folder exists (a numbered season, or
Specials/Bonus/Extras -> season 0), its own root folder now names the show
unconditionally — never a per-file guessit title, which cannot tell a
show's real name from an individual episode's one-off name when the
filename carries no reliable ShowName/SxxExx structure. The walk continues
past *every* consecutive season-like ancestor, not just the first: a
per-season Bonus folder (Show/Season N/Bonus/file.ext) is nested two
levels inside the show, both "Bonus" and "Season N" season-like on their
own, and stopping at the first would hand back "Season N" as the show's
name instead of "Show".
Also adds "livre" ("book") to the season-word vocabulary (§3.4) — some
shows number their seasons that way (Roman numerals) rather than
"season"/"saison".
Supersedes _title_from_show_siblings from the previous commit (removed):
that fallback assumed a per-file title could still be trusted often
enough to be worth borrowing from a sibling season folder — this fix
means it never needs trusting in the first place once a season-like
ancestor exists.
Verified directly against the real library this was found on, not just
synthetic tests: every sample file (a numbered episode, a Book/Bonus
feature, a Book-root "making of") now resolves to the show's real name.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The real reason a node restart alone didn't fix already-indexed entries
after the previous commit's enrichment change: _do_media_meta_request
checked media_cache's file->tmdb mapping (keyed by content hash) and
trusted it unconditionally, before ever comparing it against the file's
*current* movie/show classification. A file whose season/episode changed
on a later scan — exactly what the Specials-folder fix does, for every
file it reclassifies from "movie" to "tv" — kept answering with its
stale, wrong-kind-of-match forever, since nothing about a reclassification
touches this cache or its key.
Now falls through to a fresh search whenever the cached media_type
disagrees with what the entry resolves to right now, rather than trusting
a mapping that predates the file's current classification.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
unrelated standalone movies
Found live: a "Specials" folder full of one-off-named bonus episodes had
every file appear as its own poster, matched against TMDB by its own
title, because guessit finds no season/episode grammar at all in a
filename with no SxxExx of its own — so the classification (episode vs
standalone movie), based solely on that, fell to the movie branch. Real,
unrelated films happened to share several of those one-off titles and
matched confidently, one per Special, cluttering the Videos view with
dozens of wrong posters instead of grouping under the show.
An ancestor folder saying this is part of a show — a numbered season, or
Specials/Bonus/Extras -> season 0 — is now trusted over the filename
having no SxxExx of its own. The show's name can't come from this file's
own guessit title (that's the bug) or from siblings in the same Specials
folder (every one of them has the same gap) — it's borrowed from the
show's ordinary season folders next door, which do carry it in the usual
ShowName.SxxExx shape (_title_from_show_siblings). A synthetic, stable
episode number (alphabetical rank among the folder's video files) stands
in for the real one nothing in a Specials folder provides.
Generic, not specific to a folder literally named "Specials": the same
fallback fires for any season-like ancestor folder whose files lack
per-file episode grammar, numbered seasons included (covered by a
dedicated test).
Also hardens _title_from_siblings to require the sibling's own episode
number too, not just a title — otherwise it would borrow one Special's
one-off title as if it were representative, on a folder like this one.
Existing already-indexed entries will need a rescan (restart the node) to
be re-enriched under this logic — nothing re-derives them on its own.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
IndexEntry.path is the *folder* a file is in (indexer.py's
_virtual_dir docstring: "the directory a file appears in"), not the
file itself. GroupIndex.get_entry_by_path() treated it as if it named
one file, and every one of its four callers did too:
_do_music_meta_request, _do_media_meta_request, _do_tmdb_override, and
_admin_exec_tmdb_override. Any two files sharing a folder — an album is
one folder with many tracks, a season is one folder with many episodes
— collided: a lookup by path silently returned whichever entry the
index happened to iterate to first, regardless of which file the
client actually asked about.
Found live (2026-08-25): three unrelated albums ("High Tone - Various",
two "Le Peuple de l'Herbe" albums) all showed the same MusicBrainz
cover, because all their representative tracks happened to sit in one
"high_tone" folder alongside a track that legitimately matched that
cover. A force-reload didn't help — the bug is server-side, not a
stale client state.
Fixed by keying these four request/response pairs by `file_id` (the
entry's own content hash — already unique, already how every other
lookup in the system identifies a file) instead of `path`, both in the
wire messages (music_meta_req/resp, media_meta_req/resp, tmdb_override)
and in music-app.js/video-app.js's own hooks. GroupIndex.get_entry_by_path
is now unused and removed — GroupIndex.get_entry(file_id) already did
the right thing.
No test previously exercised either handler with two entries sharing a
folder — the only existing coverage (test_tmdb_override_policy.py) gave
each entry its own folder, so the bug never had a chance to show up.
Added that scenario there and in two new test files, all confirmed
failing against the pre-fix code before being confirmed green against
the fix.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013XSohfUQQiaE77qyFLgSv3
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
An operator routinely shares the same physical folder into more than one
group (a music library, a Séries drive) — IndexCache used to be opened
once per group (data_dir/{group_id}/index_cache.db), so the second group
to reference an already-fully-hashed multi-terabyte folder paid the same
full content read the first one did. IndexCache itself carried no
group_id in its schema; only daemon.py's wiring did. Now one instance,
opened once at startup (data_dir/index_cache.db), shared by every group's
DirectoryIndexer.
Confirmed against a real deployment (2026-08-25/26): a group sharing an
already-indexed folder with an existing group indexes it instantly, with
zero rehashing.
Also fixes a related cross-group correctness gap found during this work:
media_cache.db (thumbnails, TMDB/MusicBrainz metadata — already node-wide,
untouched by this change) was pruned for a file the moment it left *one*
group's index, even if another group's index still held the same content
hash — forcing a redundant re-fetch/re-probe/re-thumbnail for a group that
never actually lost anything. Prune now runs only once no group's index
references the file_id any more.
Adds a node admin UI action ("Maintenance" card, prune-index-cache) to
drop cache rows that no longer belong to any group's roots — skips
anything under a root that is merely temporarily unavailable (indexer.py's
"a root that goes away freezes, never empties" rule extends to this
cache too, or a reconnected drive would pay a full rehash for no reason).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013XSohfUQQiaE77qyFLgSv3
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
scanning progress
Two real-world bugs found together while testing multi-root group
creation:
- CreateGroupWizard only sent the enabled-apps PUT when the operator had
*unchecked* something, assuming "every box left checked" already matched
the node's own default (Roster.DEFAULT_APPS = chat, files). It doesn't —
so leaving every app checked, the common case, silently left
Videos/Music/Photos disabled on the node. Now sent unconditionally.
- The wizard's "add extra roots" step never polled index-status, so once
step 3 (which only watches the first/upload root) finished, the
progress bar froze while the node kept scanning the remaining roots for
minutes, unwatched. Added waitForRootsIndexed (platform.js), mirroring
waitForGroupHosted's own race handling.
That fix exposed a deeper one: indexer.py's _scan_root() only flipped
`progress.scanning` on *after* walking the directory and stat()-ing every
file — both off-loop, but slow enough on a large root that a poller's
grace period (waitForRootsIndexed's 5s) could expire before ever
observing `scanning: true` (confirmed against production logs: a GEK-init
step fired 5.058s after a root started scanning, matching the grace
period almost exactly). The stat() pass was also a synchronous loop
directly on the asyncio event loop — blocking the whole daemon (WebRTC,
chat, admin UI) for as long as it took on a root with many files. Both
fixed: `scanning` now flips on before the walk starts, and stat()-ing is
now off-loop too (_size_files).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013XSohfUQQiaE77qyFLgSv3
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
nothing
search_release() only ever tried a field-scoped exact-phrase Lucene query
(artist:"..." AND release:"..."). Verified live against musicbrainz.org:
any deviation from MusicBrainz's own spelling (a year suffix, an edition
tag, an artist credited under an older/aliased name) drops it to zero
results outright rather than a low-scored one, so the confidence check
never even ran — this is why well-recognized artists were still getting
almost no cover art. Add an unscoped loose-query fallback, escape Lucene
special characters in the interpolated tag text, and make the confidence
score consider the artist match too (not just the album title) now that
the fallback has no field scoping to rely on.
Also document MESHBAY_MUSICBRAINZ_CONTACT_DEFAULT in the systemd units
and man page, mirroring MESHBAY_TMDB_DEFAULT_TOKEN's precedent — never a
literal value in source, configured via node.env.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013XSohfUQQiaE77qyFLgSv3
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Only thumbnail bytes were ever durable in media_cache.db — every other
derived field (photo width/height/EXIF, video ffprobe duration/dims,
audio cover art) lived solely on the in-memory GroupIndex entry, so a
node restart re-decoded every photo through Pillow, re-ran ffprobe on
every video, and re-scanned for every album cover from scratch, even
though the answers already sat in the cache.
Adds photo_meta and video_meta tables (content-only fields, keyed by
file_id) and checks them before doing the expensive work. Audio gets no
new table: mutagen reads tags and duration in one inseparable call, so
caching duration alone buys nothing — instead cover-art extraction alone
is skipped via a new skip_cover flag when a cached cover already exists.
Deliberately excluded from all three caches: anything derived from the
filename or folder path (video display_title/season/episode via guessit,
audio artist/album folder-fallback) — those must keep being recomputed
fresh so a rename/move is still correctly re-derived by the existing
_reenrich_renamed_*_entries mechanisms, instead of silently handing back
a stale parse under the new name/location.
Regression tests prove cache reuse by deleting the source file (or cover)
between two enrichment runs, and prove rename/move correctness survives
the new cache by renaming/moving to a path that never exists on disk.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A new group application (docs/apps.md's plug-in mechanism), following the
plan in docs/photos.md. Unlike Videos/Music: several photo roots per group
instead of one (photo_roots is a set, one signed op replaces it whole),
a single album-grid view with no third-party matching step, and per-photo
info read from the file's own EXIF at index time — no metadata service,
no credential, no outbound network call at all.
Protocol (meshbay-common, MNP 0.10 -> 0.11, additive): `taken_at`/`camera`
on IndexEntry; `photo_roots`/`photo_roots_ack`; `OP_PHOTO_ROOTS`.
Node: roster.py stores photo_roots as a group_settings entry (JSON list,
same shape as enabled_apps); ops.py/webrtc_server.py validate and sign the
whole set in one op, same pattern as apps_enabled; a new PhotoEnricher
(indexer/enrich_photo.py) runs Pillow in its own small bounded pool,
separate from the video/audio pools, producing a resized thumbnail plus
the two EXIF fields — never GPS, checked by a grep-based regression test.
Client: photos-app.js — one album card per directory containing images,
a per-album photo grid, and a lightbox with next/previous (keyboard and
buttons), zoom in/out/fit/100% starting from the actual on-screen fit
percentage, and a "zip this album" button reusing files-app.js's own zip
mechanism (lifted into file-utils.js's downloadDirectory so both call the
same implementation). group-settings.js gets an add/remove multi-root
picker, distinct from Videos/Music's single-value one.
Bugs found and fixed before this ever shipped, worth keeping the story of:
- enrich_photo.py read width/height from the raw image *before* applying
EXIF orientation correction, and read DateTimeOriginal off the plain
0th-IFD Exif object — a real camera stores it in the Exif sub-IFD, which
Pillow only exposes via get_ifd(Exif). A flat, hand-built EXIF dict
round-trips through Pillow either way, which is exactly what would have
hidden both bugs; the regression test builds EXIF with piexif instead,
matching what real hardware produces.
- photos-app.js's album grouping stripped a trailing path segment from
entry.path under the assumption it still carried a filename — it
doesn't (files-app.js's own convention: e.path is already the
containing directory), so every album collapsed one level into its
parent. Found live against a real multi-folder library.
- transport.js's ADMIN_OP_TYPES allowlist (already the fix for an
identical bug on video_root/apps_enabled, see 4783d81) was missing
photo_roots: its admin_challenge matched no pending request and was
silently dropped, so saving a photo root just timed out after 30s with
no error.
- daemon.py pruned a thumbnail when its file left the index (root removed
or reconfigured) but never forgot the content hash was "already
attempted" — the same bytes reappearing under a renamed/relocated root
(an operator's real workflow) were then permanently skipped, forever,
with nothing to indicate why. Discarding the attempt alongside the
cache entry on prune is what makes pruning actually reversible.
- packages/meshbay-client's app:// protocol handler served every file
with no Cache-Control header, so Chromium was free to serve a stale
cached copy indefinitely — none of several `npm run sync-ui` + reload
cycles during development actually picked up the new code until the
renderer's disk cache was cleared by hand. Now sends Cache-Control:
no-store.
- the lightbox's zoomed image used flex centering (align-items/
justify-content: center) combined with overflow: auto — a well-known
trap where the browser centers overflowing content by shifting it, and
the leading half of that overflow (here, the top of a zoomed photo)
sits outside what the scrollport can actually reach. Reported live as
"unusable". Fixed by switching to top/left alignment once zoomed.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TiZG4AuSnxHohQMpwTHTyL
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Major finding: entry.id is a content hash, so the exact same physical
file — the same MP3, byte-for-byte — indexed into two different groups
(a shared library reused across several demo/test groups, or genuinely
the same folder shared into two groups) produces the *same id* in both.
_enriched_attempted was a single flat set of bare ids shared across every
group this node hosts. The moment one group's copy got enriched, every
other group's otherwise-identical copy read as "already attempted" and
was skipped forever — nothing else ever revisits an id once it's in this
set. That group's Music tab (or Videos tab, same bug, same set) showed
every affected file at duration 0 with no artist/album/thumbnail,
permanently, no matter how long you waited or how many times you
reloaded — group A having been enriched first was enough to silently
starve every later group of the same content.
Now keyed by (group_id, entry.id) throughout — the enrichment gate, the
sweep, and the rename re-enrichment path, for both video and audio (they
already shared the one set, and the collision risk is identical for
both). New regression test constructs two groups with byte-identical
audio content and confirms both enrich independently.
|